: In the manual, it calls for epoxied edges on the ply cross
: sections. However, I've done it both with and without epoxy.
: It depends on my mood, how much epoxy resin I have at the time, the
: plywood I'm using, and the alignment of the planets :)

: On the Sea Bee in the manual, I'm using interior grade plywood
: (eeks!), so a healty coat or two of epoxy on the
: edges was a must do :).... And that's all I have to say about that.

: Tom

Thanks for the response Tom. On another note.......I'm building a Sea Cruiser and the frame spacing seems a bit off. When you list spacing in feet (example 7.6'). You do mean 7' and 7.2" right and not 7'6"? Also; any idea about how long the gunnels and chines should be past the end frames? I've never done an SOF boat before and cannot talk myself into hacking them off. I'm too afraid I'll cut them too short. I've gone home and just stared at it for 2 nights in a row now afraid to do anything:)......