: When I built my SOF, I used ash for the 1/4 X 1-1/4 ribs. I only
: had access to kiln dried stock and the first go was a disaster.
: 50% breakage and I could not get tight bends. For the second
: round, I soaked the milled stock in water overnight. Big
: improvement, almost no tearout and nice tight bends.
I'd be willing to bet that your second attempt was with wood from a different board, which is why it worked. Soaking overnight is a waste of time, as all it does is get the outer surface wet. Test it for yourself, take a piece that's been soaked overnight, then plane the surface. Within 2-3 strokes, you'll be down to dry wood, which means the water penetrated all of ten thousandths of an inch or less.
Messages In This Thread
- Skin-on-Frame: preferred rib material
StephenHJ -- 3/23/2011, 7:27 pm- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/23/2011, 8:19 pm- Re: Skin-on-Frame: preferred rib material
ancient kayaker -- 3/23/2011, 8:53 pm- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/23/2011, 9:11 pm- Re: Skin-on-Frame: preferred rib material
David Bynoe -- 3/23/2011, 11:43 pm- Re: Skin-on-Frame: preferred rib material
StephenHJ -- 3/24/2011, 2:12 am- Re: Skin-on-Frame: preferred rib material
M. McMann -- 3/24/2011, 3:35 am- Re: Skin-on-Frame: preferred rib material
Paul G. Jacobson -- 3/24/2011, 4:02 am- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/24/2011, 7:25 am- Re: Skin-on-Frame: preferred rib material
Paul Montgomery -- 3/24/2011, 8:51 am
- Re: Skin-on-Frame: preferred rib material
Scott Shurlow -- 3/24/2011, 9:57 am - Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
Foster -- 3/24/2011, 11:39 am- Re: Skin-on-Frame: preferred rib material
David Bynoe -- 3/24/2011, 3:03 pm- Re: Skin-on-Frame: preferred rib material
Brian Nystrom -- 3/25/2011, 6:57 am
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
ancient kayaker -- 3/24/2011, 11:15 pm- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/25/2011, 9:06 am
- Re: Skin-on-Frame: preferred rib material
Brian Nystrom -- 3/25/2011, 6:52 am- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/25/2011, 9:10 am- Re: Skin-on-Frame: preferred rib material
ancient kayaker -- 3/25/2011, 4:08 pm- Re: Skin-on-Frame: preferred rib material
Bill Hamm -- 3/25/2011, 6:58 pm
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
Thomas Duncan -- 3/24/2011, 9:25 pm - Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material *PIC*
Rob Macks / Laughing Loon CC&K -- 3/24/2011, 9:07 am- Re: Skin-on-Frame: preferred rib material
Scott Shurlow -- 3/24/2011, 9:54 am- Re: Skin-on-Frame: preferred rib material
Aaron Hines -- 3/24/2011, 5:36 pm- Re: Skin-on-Frame: preferred rib material
Bill Padin -- 3/24/2011, 7:07 pm- Re: Skin-on-Frame: preferred rib material
Brian Nystrom -- 3/25/2011, 7:03 am- Re: Skin-on-Frame: preferred rib material
billpadin -- 3/25/2011, 8:47 pm
- Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material
Mike Savage -- 3/24/2011, 8:02 pm- Re: Skin-on-Frame: preferred rib material
Thomas Duncan -- 3/24/2011, 9:41 pm- Re: Skin-on-Frame: preferred rib material
StephenHJ -- 3/25/2011, 1:00 pm - Re: Skin-on-Frame: preferred rib material
- Re: Skin-on-Frame: preferred rib material