: After you finish sanding the paddle with the 220, take it for a
: paddle or run it under the shower for a bit. The grain will
: raise and after it dries you sand it again. It's just oil; I
: would sand it down again and re-oil it.
: I saw something on youtube and I'm not sure if it's true but
: supposedly if you finish sanding with 320 or whatever they use
: for plumbing it will stengthen the paddle. Don't remember the
: theory (something about closing up the spores?) entirely but it
: seemed to make sense.
Actually if you've got raised grain, better to use steel wool, sandpaper just makes more fuzz, steel wool cuts the fuzz off.
Then re-oil.
Bill H.
Messages In This Thread
- Paddle: few quetions
John Lasky -- 3/25/2011, 11:24 am- Re: Paddle: few quetions
Fred Gasper -- 3/25/2011, 1:15 pm- Re: Paddle: few quetions
Aaron McConnell -- 3/25/2011, 2:26 pm- Re: Paddle: few quetions
Bill Hamm -- 3/25/2011, 3:52 pm- Re: Paddle
Paul G. Jacobson -- 3/26/2011, 3:26 am- Re: Paddle
Bill Hamm -- 3/26/2011, 7:30 am
- Re: Paddle
- Re: Paddle: few quetions
Brian Nystrom -- 3/28/2011, 6:49 am- Re: Paddle: few quetions
Paul Lueders -- 3/28/2011, 8:23 pm
- Re: Paddle: few quetions
- Re: Paddle: few quetions