: I'm putting semi-soft pad eyes in my new boat. I using
: 3/4"webbing but I've made plywood backing plates (see
: image). I like the idea of the flat plate for making a good
: waterproof seal. My question is does anybody know of a
: sealer/adhesive that will allow me to remove the pad eye should
: I need to? When you think of it, the pad eye does not need to be
: glued in super solid. By nature, the pad eye wants to pull out
: of the hull and any pressure to push it back in through the hull
: would be minimal.

: Any suggestions for a sealer/adhesive that will allow removal -
: with some prying, obviously?

: Sean

I started using this, recommended by Bill Hamm. He says it will come off easier that silicon when it's time to re-varnish.
http://www.sashcosealants.com/home_improvement/lexel.aspx

Kirk