: It could be sewn but the seam would be difficult to glass without
: getting it full of air bubbles. You could glue it the fabric to
: the frame either of two ways, either with the seaming glue used
: for sewing (seam stick I think is what it's called) or with
: contact cement, both work though I prefer using the contact
: cement, but it does color the Dacron which the seam stick
: doesn't. The seam stick doesn't hold real well on the Dacron,
: but once it's glassed it doesn't matter.

: Hmm... what's it cost... I usually am working from full gallons of
: epoxy so don't know for sure how much I use, I suspect that
: it'll take more than a quart kit and less than two. I use West
: brand 105/207 resin and I know that works, I've not tried this
: method with other resins but suspect they will work as well. I
: know Dan's done one (or more) and he uses another brand resin
: (forget which one). I've been using the 3.2 ounce tight weave
: glass from Thayercraft.com it's pretty cheap and works very
: well, though if you're going to have rough use you might want to
: double the glass on the bottom.

: The Dacron I get from Aircraft Spruce (aircraftspruce.com) when you
: get to the site, in the search block type in dacron and the
: uncertified fabric will pop up. Certified fabric can certainly
: be used but it's far more expensive and I don't think the FAA's
: gonna come inspect your kayak, so it's not needed :)

: I've not looked up the costs of any of this recently, not built one
: since the class I taught in the fall of 2010, been a little
: while.

: Any other questions feel free to ask, either here or privately :)

: Bill H.

Hey Bill, you just gave me a great idea- build a flying kayak! You could do an ultralight delta wing that detatches. Fly in to some remote mountain lake, paddle, fly home. LOL!!! Call it the "Flyak!" Okay, that was really very much kidding, although there is a company making a flying RIB, and it's basically just a regular "rubber ducky" ridgid inflatable with a delta wing on it.

Anyway- on a more serious note- with your epoxy skin method it seems the skin would be brittle and have a tendency to tear. What am I missing? Maybe because I'm thinking in terms of fiberglass cloth and not dacron or nylon?