: Speaking of constant camber the semi-stripper I mentioned - it's at
: http://www.kayakforum.com/cgi-bin/Building/index.cgi/md/read/id/203415/sbj/skin-on-frame-preferred-rib-material/
: - is a variant of the constant camber method, since the bilge
: section is constant throughout the length of the boat.

I also did the same method, sort of, on a round chine SOF, made a strip built constant camber chine. It's almost as easy as the flat panel method since the joint angles are constant so the angles can be cut when you're ripping the strips.

Still the idea is interesting.

Bill H.