: I decided to round the edges of my lower bow with a router, and as
: I went around it with a handheld one, the guide slipped as it
: approached the drop-off of the middle lamination and dug a
: little deeper into the wood. You can see on the image where I
: promptly stopped cutting, so the last few millimeters still have
: a square edge.

: Obviously it's not too easy putting wood back on, but I image this
: sort of thing has happened on other boat parts.. Any suggestions
: on how to fix?

: Sorry for the blurriness, phone camera.

It looks like it's the rear of the bow piece that's damaged--the squared-off end that doesn't show. Right? If so, forget about it. It's not structural, and you can't see it in the finished boat. It's buried.

--Scott