Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Spray varnish
By:Bill Hamm
Date: 4/18/2011, 12:14 am
In Response To: Re: Tools: Spray varnish (Nick Riccardi)

: Hi Bill, Thanks for the info I'm defenately getting those rollers.
: This may be off topic but I would like to run something by you
: and get your vibes in it. Last year I made my first kayak and had a
: devil of a time getting the tape to bed on the inside shear
: when I put top to bottom. This year I made a jig,its a small roller
: frame with 5 fender washers ans 5 small nut spaced between
: the washers the nuts are loose and the end of the axle I drilled a
: small hole for a cotter pin. hope this works to get the glass
: down
: Nick R.

Hi Nick,

You made your own tooth roller; http://www.bodico.com/Laminating_Rollers.aspx

It'll work fine, though it's easier to just buy one ;)

Bill H.

Messages In This Thread

Tools: Spray varnish
Kim Haubert -- 4/17/2011, 12:09 am
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 12:59 am
Re: Tools: Spray varnish
Kim Haubert -- 4/17/2011, 12:49 pm
Re: Tools: Spray varnish
Joe whitman -- 4/17/2011, 11:04 am
Re: Tools: Spray varnish
Mike Bielski -- 4/17/2011, 11:42 am
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 2:09 pm
Re: Tools: Spray varnish
Etienne Muller - ireland -- 4/17/2011, 2:18 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 2:21 pm
Re: Tools: Spray varnish
Nick Riccardi -- 4/17/2011, 2:45 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/17/2011, 4:00 pm
Re: Tools: Spray varnish
Nick Riccardi -- 4/17/2011, 5:28 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/18/2011, 12:14 am
Re: Tools: Spray varnish
Steve Hill -- 4/19/2011, 8:10 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/20/2011, 1:39 am
Re: Tools: Spray varnish
Steve Hill -- 4/20/2011, 2:52 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 12:52 am
Re: Tools: Spray varnish
Steve Hill -- 4/21/2011, 5:23 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 6:15 am
Re: Tools: Spray varnish *PIC*
mtkayak (Mike Trutwin) -- 4/18/2011, 1:41 pm
Re: Tools: Spray varnish
Mike Savage -- 4/18/2011, 3:28 pm
Re: Tools: Spray varnish
Ian Cummins -- 4/18/2011, 4:17 pm
Re: Tools: Spray varnish
mtkayak (Mike Trutwin) -- 4/18/2011, 4:45 pm
Re: Tools: Spray varnish
Dan Caouette (CSFW) -- 4/18/2011, 6:05 pm
Re: Tools: Spray varnish
Mike Bielski -- 4/18/2011, 7:47 pm
Re: Tools: Spray varnish
Bill Hamm -- 4/19/2011, 1:37 am
Re: Tools: Spray varnish *PIC*
Dave Houser -- 4/20/2011, 8:02 pm
Re: Tools: Spray varnish
Etienne Muller - ireland -- 4/21/2011, 4:13 am
Re: Tools: Spray varnish
Bill Hamm -- 4/21/2011, 6:16 am