Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Dacron and glass covering
By:Clayton Plunkett
Date: 4/29/2011, 8:23 am

: Hi Clayton,

: I too use the heavier fabric, it for some odd reason is less
: expensive than the 2.7 ounce. I've used the 1.8 ounce, it works,
: it's not as easy to use than the heavier fabric though since it
: deflects more when you're putting on the fiberglass, sorta
: trying to work on the surface of a balloon. And it saves a whole
: 1 ounce per yard length of boat, so for a 17 footer you save
: somewhat less than 6 ounces :) I used it on the catamaran kayak
: where every once counts (has two hulls). The heavier material
: shrinks tighter, makes a more stable surface to glass over.

: The dacron ends up being somewhat like a poor man's version of
: Kevlar in the combined weave, adds a degree of toughness to the
: total laminate.

: Bill H.

Thanks Bill,
That is very helpful. I have a Sea Pup frame that has never been covered and I want to try the Dacron Glass system out on it.
Look forward to the covering manuel when it is available.
Clayton

Messages In This Thread

Skin-on-Frame: Dacron and glass covering
Clayton Plunkett -- 4/28/2011, 9:47 am
Re: Skin-on-Frame: Dacron and glass covering
Dan Caouette (CSFW) -- 4/28/2011, 9:10 pm
Re: Skin-on-Frame: Dacron and glass covering
Clayton Plunkett -- 4/29/2011, 8:24 am
Re: Skin-on-Frame: Dacron and glass covering
Bill Hamm -- 4/28/2011, 11:31 pm
Re: Skin-on-Frame: Dacron and glass covering
Clayton Plunkett -- 4/29/2011, 8:23 am
Re: Skin-on-Frame: Dacron and glass covering
Bill Hamm -- 4/29/2011, 8:43 am