Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: glassing problem
By:Al Edie
Date: 5/8/2011, 11:22 am
In Response To: Re: Strip: glassing problem (Paul G. Jacobson)

+1 on cutting them out and applying small patches. The likelihood of making the blisters invisible by injecting resin is, I think, not great, plus you may then have bumps that may be more difficult to fair than overlaps. The light glass you are using should make patches easy to fair.

Good luck,

Allan Edie
: If you can inject one or two right now, then see how that works.
: Otherwise, you can ignore them for now andpatch them at the end
: of the year, or you can cut these open with a sharp knifeand cut
: away the loose cloth, or sand them away with a medium or coarse
: grit sandpaper. Slap on a patch that overlaps the area by at
: least an inch on all sides, and let the patch harden. then sand
: the area smooth and put on your next coats of resin to fill the
: weave. The repaired spots will be invisible.

: PGJ

Messages In This Thread

Strip: glassing problem
Nick Riccardi -- 5/7/2011, 5:42 pm
Re: Strip: glassing problem
Paul G. Jacobson -- 5/7/2011, 5:49 pm
Re: Strip: glassing problem
Al Edie -- 5/8/2011, 11:22 am
Re: Strip: glassing problem
Nick Riccardi -- 5/8/2011, 12:08 pm
Re: Strip: glassing problem
Bill Hamm -- 5/8/2011, 1:37 pm
Re: Strip: glassing problem
Bill Hamm -- 5/8/2011, 1:40 pm
Re: Strip: glassing problem
Nick Riccardi -- 5/8/2011, 4:37 pm
Re: Strip: glassing problem
Al Edie -- 5/8/2011, 10:23 pm
Re: Strip: glassing problem
Bill Hamm -- 5/9/2011, 12:19 am
Re: Strip: glassing problem
Nick Riccardi -- 5/9/2011, 10:58 am
Re: Strip: glassing problem
Bill Hamm -- 5/9/2011, 2:02 pm
Re: Strip: glassing problem
Rob Macks / Laughing Loon CC&K -- 5/9/2011, 3:58 pm
Re: Strip: glassing problem
Bill Hamm -- 5/10/2011, 2:01 am
Re: Strip: glassing problem
Rob Macks / Laughing Loon CC&K -- 5/9/2011, 8:46 am
Re: Strip: glassing problem
george jung -- 5/8/2011, 3:58 pm
Re: Strip: glassing problem
dave g -- 5/8/2011, 11:54 pm
Another possible cause
Jay Babina -- 5/9/2011, 7:54 am
Re: Strip: glassing problem
george jung -- 5/9/2011, 7:16 pm
Re: Strip: glassing problem *PIC*
dave g -- 5/9/2011, 11:11 pm
Re: Strip: glassing problem
Kirk Fredericks - Farback Carpentry and Automation -- 5/10/2011, 10:09 am
Re: Strip: glassing problem
StephenHJ -- 5/10/2011, 12:25 pm
Re: Strip: glassing problem
Kirk Fredericks - Farback Carpentry and Automation -- 5/10/2011, 3:37 pm
Re: Strip: glassing problem
MattD. -- 5/8/2011, 1:45 pm