If you don't have a good drape before you start, it
: only gets worse once you're 'under the gun' and committed to
: wetting out. Preparation is key!

I couldn't agree more I used the 3.2 on my first a guillemot about three months ago. It took me half an hour per layer to smooth the glass I did two layers at once. I used no seal coat just the two layers of 3.2 on top of each other dry with silvertip epoxy. Like I said each layer took about half an hour to smooth with a 3" chip brush so over an hour to get it prepped for wet out... but not a bubble! Starting without a wrinkle was key also falling temp. was very helpful, finally the silvertip was really hot when I started, I can't tell you the temp but it was two feet in front of radiant heat for the whole time I was smoothing the cloth, when I started wetting out it was like pouring on water. I really think this was the way to go. I have never wet out cloth so easily and I work with fiberglass for a living! Good luck hope this helps.

dave g