Re: Strip: Hatch spacer thickness
In Response To: Strip: Hatch spacer thickness (John Bratton)
: I have ordered the hatch seal material from CLC for my Night Heron.
: Anyone who has used the CLC material, what thickness of spacer
: between the lip and underneath the deck did you guys use for a
: flush fit?
: Thanks,
: John
I didn't use the clc stuff but the seals that I used were closed cell foam weather stripping 3/16 tall by 3/8 wide for the building of the hatch ring, then when I outfitted the finished hatch I used 3/8 by 3/8. The finished hatch using under deck bungees sits about 1/16 proud of the deck. You are talking about the one ocean method on hatch ring seals right?
hope this helps
btw hatches seem to be water tight.
dave g
Messages In This Thread
- Strip: Hatch spacer thickness
John Bratton -- 5/24/2011, 2:06 pm- Re: Strip: Hatch spacer thickness
Damian Wentzel -- 5/24/2011, 10:01 pm- Re: Strip: Hatch spacer thickness
John Bratton -- 5/25/2011, 9:59 am
- Re: Strip: Hatch spacer thickness
dave g -- 5/25/2011, 7:45 pm - Re: Strip: Hatch spacer thickness
- Re: Strip: Hatch spacer thickness