: Hi Jom,
: Doesn't exist as far as I know.
: You could attach a pvc T fitting (to fit your vaccuum cleaner) to
: the middle of your board with epoxy and fibreglass, perforate
: the sides of a an old vaccuum cleaner hose (or any flexible
: tube), attach to both ends of the T joint and attach to the back
: of the board the same way. Attach vacuum cleaner to free end of
: T joint perhaps with a swivel fitting if you can find one. It
: should work to some degree.
: JohnK

Hi JohnK,
Thought I would share this with you. It's ugly, uncomfortable but highly effective. It eliminates 100% of airborn dust and minimal dust on floor. I couldn't be happier!