Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: First hatch done...
By:Damian Wentzel
Date: 6/19/2011, 1:23 pm
In Response To: Re: Strip: First hatch done... (John Bratton)

: Check this link from Redfish. This is the method I used. There are
: some other techniques I have seen add to this method that help.
: One is to cover the whole layup with wax paper and a few pounds
: of sand to keep pressure on the curing epoxy. I used a half inch
: wide seal. I will use 3/8" next time and also will go
: smaller on the magnets (1/2" to 3/8"). The lip just
: got too wide and the magnets too strong! The barrier is shelf
: paper availible at Ace hardware. The rare earth magnets come
: from Woodcraft. The boat is almost done so I will have some
: completed pictures soon...if all goes well.

John,

Sorry if i'm missing something but i don't see a link in your post?
Thanks again,

Damian

Messages In This Thread

Strip: First hatch done... *PIC*
John Bratton -- 6/4/2011, 1:47 pm
Re: Strip: First hatch done... *PIC*
Joe Whitman -- 6/6/2011, 2:51 pm
Re: Strip: First hatch done...
John Bratton -- 6/6/2011, 4:34 pm
Re: Strip: First hatch done...
Jim Schaffer -- 6/6/2011, 4:58 pm
Re: Strip: First hatch done...
Joe Whitman -- 6/6/2011, 5:19 pm
Re: Strip: First hatch done...
John Bratton -- 6/6/2011, 6:40 pm
Re: Strip: First hatch done...
Jim Schaffer -- 6/6/2011, 8:13 pm
Re: Strip: First hatch done...
John Bratton -- 6/7/2011, 10:28 am
Re: Strip: First hatch done...
Damian Wentzel -- 6/14/2011, 8:55 pm
Re: Strip: First hatch done...
John Bratton -- 6/14/2011, 9:52 pm
Re: Strip: First hatch done...
Damian Wentzel -- 6/19/2011, 1:23 pm
Re: Strip: First hatch done...
John Bratton -- 6/23/2011, 8:25 pm
Re: Strip: First hatch done...
StephenHJ -- 6/23/2011, 5:51 pm
Re: Strip: First hatch done...
John Bratton -- 6/23/2011, 8:22 pm
Re: Strip: First hatch done...
Bill Hamm -- 6/15/2011, 8:35 am
Re: Strip: First hatch done...
John Bratton -- 6/23/2011, 8:27 pm
Re: Strip: First hatch done...
Jim Schaffer -- 6/23/2011, 6:49 pm
Re: Strip: First hatch done...
John Bratton -- 6/23/2011, 8:44 pm
Re: Strip: First hatch done...
Jim Schaffer -- 6/23/2011, 11:29 pm
Re: Strip: First hatch done...
Bill Hamm -- 6/24/2011, 7:40 am
Re: Strip: First hatch done...
StephenHJ -- 6/24/2011, 2:42 pm
Re: Strip: First hatch done...
Jim Schaffer -- 6/24/2011, 4:51 pm
Re: Strip: First hatch done...
StephenHJ -- 6/24/2011, 6:30 pm
Re: Strip: First hatch done...
Bill Hamm -- 6/25/2011, 7:07 am
Re: Strip: First hatch done...
Jim Schaffer -- 6/25/2011, 9:34 am
Re: Strip: First hatch done...
Bill Hamm -- 6/26/2011, 12:48 am