Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: two part polyurethane question
By:Al Edie
Date: 6/22/2011, 7:19 pm
In Response To: Re: Strip: two part polyurethane question (Dan Caouette (CSFW))

Hi Dan,
I posted the answer to your question re. sandpaper in the wrong place under Mike's reply. Got to run,

AE

: I've use quite a few quarts of Perfection. It can be tricky to
: apply but I've never had your issues though.

: The quote above might give a clue to your issue: What kind of
: sandpaper did you use? I'm not aware of wet/dry paper made for a
: power sander. Some/most dry papers are coated with stearates to
: prevent clogging. If you didn't get wash all of those off you're
: screwed. For the final coats I wetsand by hand with plenty of
: clean water. I then follow Interlux's instructions on what
: solvents to use for washing and prepping.

Messages In This Thread

Strip: two part polyurethane question
Al Edie -- 6/21/2011, 6:44 pm
Re: Strip: two part polyurethane question
Mike Bielski -- 6/22/2011, 10:22 am
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 10:50 am
Re: Strip: two part polyurethane question
Mike Bielski -- 6/22/2011, 11:00 am
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 6:53 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:13 pm
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/22/2011, 4:21 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:09 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/22/2011, 7:35 pm
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/23/2011, 9:26 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/23/2011, 9:53 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 10:57 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/24/2011, 7:58 am
Re: Strip: two part polyurethane question
Al Edie -- 6/24/2011, 1:09 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/25/2011, 7:19 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 10:13 am
Re: Strip: two part polyurethane question
Bill VerSteeg -- 6/27/2011, 10:55 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/28/2011, 2:56 am
Re: Strip: two part polyurethane question
Dan Caouette (CSFW) -- 6/23/2011, 9:40 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 11:09 am
Re: Strip: two part polyurethane question
Bryan Kapteyn -- 6/23/2011, 11:44 am
Re: Strip: two part polyurethane question
Al Edie -- 6/23/2011, 4:13 pm
Re: Strip: two part polyurethane question
Bryan Kapteyn -- 6/23/2011, 4:37 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/24/2011, 1:17 pm
Re: Strip: two part polyurethane question
Bill Hamm -- 6/25/2011, 7:24 am
Re: Strip: two part polyurethane question
Bill Hamm -- 6/24/2011, 8:02 am
Re: Strip: two part polyurethane question
Kevin McAtee -- 6/28/2011, 2:59 pm
Re: Strip: two part polyurethane question
Al Edie -- 6/22/2011, 7:19 pm
Re: Strip: two part polyurethane question
Mike Bielski -- 6/24/2011, 12:22 am
update, last coat
Al Edie -- 6/23/2011, 1:19 pm
Re: update, last coat
Dave Houser -- 6/23/2011, 3:18 pm
Re: update, last coat
Al Edie -- 6/23/2011, 4:19 pm
Re: update, last coat
Bill Hamm -- 6/24/2011, 8:05 am