This is a "Hammstyle" glass over dacron built in Bill's class. 3.2 oz is probably light for how I treat boats, and it may be a case of some wear-through in a couple spots along the chines or keel.

: One more thought, what did you seal it with?

: I have settled on polyester and paint. I have found that it takes 3
: coats of paint. I did one with 2 coats and it looked great. Just
: like you describe, it slowly took on water with a skirt but yet
: there was on obvious leak or damage. The water on the saw horse
: trick showed me I had lots of seepage, not really leaks. But
: dozens of water drops started to form on the hull.

: Took it in the shop, turned out the lights and put a light inside
: the boat. I would see dozens of pin holes when I got under the
: book. Third coat solved it and now three coats is standard on
: the hull.