Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Microballoons
By:Jay Babina
Date: 7/27/2011, 3:14 pm
In Response To: Re: Epoxy: Microballoons (Mike Bielski)

I do have a bag of maple dust that I bought. If you never tried it, you can make a really smooth filler with it vs. sawdust from a saw. It was cheap too - from Newfound woodworks.a Yes, for an end pour, might as well use what you have. I used to save dust from my pad sander but this maple dust is better. Either it's finer and plus the hard wood dust ??

Messages In This Thread

Epoxy: Microballoons
Damian Wentzel -- 7/26/2011, 8:50 pm
Re: Epoxy: Microballoons
Glen Smith -- 7/26/2011, 9:07 pm
Re: Epoxy: Microballoons
Robert N Pruden -- 7/27/2011, 12:19 pm
Re: Epoxy: Microballoons
Jay Babina -- 7/27/2011, 6:41 am
Re: Epoxy: Microballoons
Robert N Pruden -- 7/27/2011, 12:25 pm
Re: Epoxy: Microballoons
Mike Bielski -- 7/27/2011, 12:29 pm
Re: Epoxy: Microballoons
StephenHJ -- 7/27/2011, 12:52 pm
Re: Epoxy: Microballoons
Mike Bielski -- 7/27/2011, 1:32 pm
Re: Epoxy: Microballoons
Bill Hamm -- 7/29/2011, 10:18 am
Re: Epoxy: Microballoons
Mike Bielski -- 7/29/2011, 10:28 am
Re: Epoxy: Microballoons
Bill Hamm -- 7/29/2011, 10:34 am
Re: Epoxy: Microballoons
Jay Babina -- 7/27/2011, 3:14 pm
Re: Epoxy: Microballoons
StephenHJ -- 7/27/2011, 12:50 pm
Re: Epoxy: Microballoons *PIC*
Dave Houser -- 7/27/2011, 9:30 pm
Totally agree! *NM*
Glen Smith -- 7/27/2011, 10:40 pm
Re: Epoxy: Microballoons
Mike Bielski -- 7/28/2011, 9:29 am
Re: Epoxy: Microballoons
Bill Hamm -- 7/29/2011, 10:45 am