: I have decided to refinish my redfish King and get rid of some
: problems that have been bothering me. The issue is a significant
: amount of cloudiness on the right front quarter of my boat. It
: got cloudy there shortly after the epoxy cured and has been
: bothering me since. Perhaps my mix ratio was wrong, or maybe
: there was moisture in the mixing cups, or maybe it was a
: consequence of epoxy plus high louisiana humidity. It looks like
: I will have to reglass that quarter since I have to sand to bare
: wood to get the cloudiness out. I don't plan on reglassing the
: entire boat, so I hope this works and is cosmetically
: acceptable. I will also be patching some dents where the weave
: is visible. I have done small patches before that are
: practically invisible, but never on such a large area, so I hope
: this comes out right.

Should be fine structurally, though if it's been glassed for a long time it might be a trick to get the colors to match.

Cloudy is usually a moisture/humidity problem, though not always.

Bill H.