Date: 9/2/2011, 12:49 pm
Thanks all for the input.
I don't think getting the right temperature will be much of an issue. Here in Ohio is in the 90's during the day and 70's, at night at least for next few days.
@Rob : not a manual for say. I have been going off of "The Strip-Built Sea Kayak", "Kayakcraft: fine woodstrip kayak construction" and your web site along with others...
Also I have some cross grain sanding scratches (yes I know allays sand with the grain ... ) which your state will show up like a sore thumb in a clear layup. I was wandering just how much scratches and minor imperfections (gaps about 1/32 or less ) are magnified after finishing? I am hesitant to do any more sanding because even with a long fairing board and fresh sand paper (changing every 5 min or less) the softer wood is starting to cup out. It is not extream but it is noticeable when you run your hand over it. I would say 5 to 15 mills max.
Messages In This Thread
- Epoxy: Fill Coat and glassing time line and other questio *PIC*
Jmoore -- 9/1/2011, 7:31 pm- Re: Epoxy: Fill Coat and glassing time line and ot
Etiennemuller Muller Ireland -- 9/1/2011, 8:05 pm- Re: Epoxy: Fill Coat and glassing time line and ot
Rob Macks / Laughing Loon CC&K -- 9/1/2011, 8:20 pm- Re: Epoxy: Fill Coat and glassing time line and ot
Eric M. -- 9/2/2011, 11:37 am- Re: Epoxy: Fill Coat and glassing time line and ot
Jmoore -- 9/2/2011, 12:49 pm- Re: Epoxy: Fill Coat and glassing time line and ot
Rob Macks / Laughing Loon CC&K -- 9/2/2011, 1:42 pm- Re: Epoxy: Fill Coat and glassing time line and ot
Jmoore -- 9/2/2011, 1:58 pm
- Re: Epoxy: Fill Coat and glassing time line and ot
Bill Hamm -- 9/3/2011, 1:19 am - Re: Epoxy: Fill Coat and glassing time line and ot
- Re: Epoxy: Fill Coat and glassing time line and ot
Greg New -- 9/2/2011, 7:07 pm- Bit the bulit and just did it *PIC*
Jmoore -- 9/5/2011, 2:45 pm- Should not have lissend to dad! *PIC*
Jmoore -- 9/5/2011, 3:54 pm- Re: Should not have lissend to dad!
Rick Jensen -- 9/5/2011, 4:38 pm- Re: Should not have lissend to dad!
dave g -- 9/5/2011, 8:56 pm- Re: Should not have lissend to dad!
Etiennemuller Muller Ireland -- 9/6/2011, 5:08 am
- Re: Should not have lissend to dad!
- Re: Should not have lissend to dad!
Mike Savage -- 9/6/2011, 1:43 pm - Re: Should not have lissend to dad!
- Re: Bit the bulit and just did it
Bill Hamm -- 9/6/2011, 2:00 am- Re: Bit the bulit and just did it
Sean D -- 9/6/2011, 10:32 am- Re: Bit the bulit and just did it
Jmoore -- 9/6/2011, 12:03 pm
- Re: Bit the bulit and just did it
- Re: Should not have lissend to dad!
- Re: Epoxy: Fill Coat and glassing time line and ot
- Re: Epoxy: Fill Coat and glassing time line and ot