Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fill Coat and glassing time line and ot
By:Jmoore
Date: 9/2/2011, 1:58 pm
In Response To: Re: Epoxy: Fill Coat and glassing time line and ot (Rob Macks / Laughing Loon CC&K)

: I am hesitant to do any more sanding

: Wet the wood with water and a sponge and you will see if the
: scratches will show up.

Thanks! I saw the wetting trick in the books and was considering wetting it but was afraid it would pertinently discolour / damage the wood. The reason for this is I had to sand off some sweat marks where the wood (western Red wood) change colour when I dripped sweat on it. This was probably form the salt etc. and pure water will have less of an effect on the wood.

: On your hull bottom I wouldn't worry about it. In more visible
: areas just work on the spot with scratches
: with 120 then 220 paper on a hand sanding block.

: Water is the best and only solvent to use on wood, epoxy and
: varnish.

: Rob

Messages In This Thread

Epoxy: Fill Coat and glassing time line and other questio *PIC*
Jmoore -- 9/1/2011, 7:31 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Etiennemuller Muller Ireland -- 9/1/2011, 8:05 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Rob Macks / Laughing Loon CC&K -- 9/1/2011, 8:20 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Eric M. -- 9/2/2011, 11:37 am
Re: Epoxy: Fill Coat and glassing time line and ot
Jmoore -- 9/2/2011, 12:49 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Rob Macks / Laughing Loon CC&K -- 9/2/2011, 1:42 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Jmoore -- 9/2/2011, 1:58 pm
Re: Epoxy: Fill Coat and glassing time line and ot
Bill Hamm -- 9/3/2011, 1:19 am
Re: Epoxy: Fill Coat and glassing time line and ot
Greg New -- 9/2/2011, 7:07 pm
Bit the bulit and just did it *PIC*
Jmoore -- 9/5/2011, 2:45 pm
Should not have lissend to dad! *PIC*
Jmoore -- 9/5/2011, 3:54 pm
Re: Should not have lissend to dad!
Rick Jensen -- 9/5/2011, 4:38 pm
Re: Should not have lissend to dad!
dave g -- 9/5/2011, 8:56 pm
Re: Should not have lissend to dad!
Etiennemuller Muller Ireland -- 9/6/2011, 5:08 am
Re: Should not have lissend to dad!
Mike Savage -- 9/6/2011, 1:43 pm
Re: Bit the bulit and just did it
Bill Hamm -- 9/6/2011, 2:00 am
Re: Bit the bulit and just did it
Sean D -- 9/6/2011, 10:32 am
Re: Bit the bulit and just did it
Jmoore -- 9/6/2011, 12:03 pm