Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Where and how to install skeg
By:Jay Babina
Date: 9/20/2011, 8:13 pm
In Response To: Re: Where and how to install skeg (Kevin Greer)

Here's what I would do - (Just opinion)

I would trace the opening on the box and cut it out a bit larger than the box. Perhaps by a 1/16" or less so the box can loosely slide in an out.

I would saturate the opening with epoxy and wrap glass cloth from the bottom around the opening sealing the cut out wood.

Sand and roughen the box plastic along the bottom. place it in the opening flush to the bottom and duct tape across the bottom protecting the opening. Then with an artist brush, paint in unthickened epoxy around the opening from the inside of the hull, filing the gap. Once it hardens, you can put on some glass on the inside and a filet.

In other words, I would have it flush to the outside. Wether you go flush or float it on the wood thickness, I think you would be fine either way.

Messages In This Thread

Strip: Where and how to install skeg
Kevin Greer -- 9/18/2011, 6:32 pm
Re: Strip: Where and how to install skeg
Joy -- 9/18/2011, 7:01 pm
Re: Strip: Where and how to install skeg *PIC*
Kevin Greer -- 9/18/2011, 8:13 pm
Re: Strip: Where and how to install skeg
Bill Hamm -- 9/20/2011, 2:01 am
Re: Strip: Where and how to install skeg
Bill Hamm -- 9/20/2011, 2:15 am
Where and how to install skeg
Jay Babina -- 9/20/2011, 8:12 am
Re: Where and how to install skeg
Kevin Greer -- 9/20/2011, 10:12 am
Re: Where and how to install skeg
Jay Babina -- 9/20/2011, 8:13 pm
Re: Where and how to install skeg
Bill Hamm -- 9/21/2011, 1:40 am
Re: Where and how to install skeg
Etiennemuller Muller Ireland -- 9/21/2011, 3:01 pm
Re: Where and how to install skeg
Bill Hamm -- 9/21/2011, 3:19 pm
Re: Where and how to install skeg
Etiennemuller Muller Ireland -- 9/21/2011, 4:09 pm
Re: Where and how to install skeg
Bill Hamm -- 9/22/2011, 2:08 am
Re: Where and how to install skeg
Kirk Fredericks -- 3/25/2012, 2:14 pm
Re: Where and how to install skeg
Kevin Greer -- 9/21/2011, 12:37 pm
Re: Where and how to install skeg
Bill Hamm -- 9/22/2011, 2:10 am
Re: Where and how to install skeg
Al Edie -- 9/23/2011, 1:39 am
Re: Where and how to install skeg *NM* *PIC*
Kevin Greer -- 10/14/2011, 3:42 pm
Re: Where and how to install skeg *PIC*
Kevin Greer -- 10/14/2011, 3:55 pm
Re: Where and how to install skeg *PIC*
Kevin Greer -- 10/14/2011, 3:57 pm
Re: Where and how to install skeg
Bill Hamm -- 10/14/2011, 5:35 pm
Re: Where and how to install skeg
Kevin Greer -- 10/14/2011, 8:59 pm
Re: Where and how to install skeg
daan daniels -- 10/17/2011, 3:35 pm
Re: Where and how to install skeg
Malcolm Schweizer -- 10/17/2011, 3:40 pm