Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Seat advice wanted for MicroBootlegger
By:Glen Smith
Date: 9/27/2011, 8:27 pm

: Good gracious, what a beautiful boat! Congrats Glen.
: Could you describe or possibly post a pic of the jam(b)? cleat.
: Those seats looks pretty comfy.
: And is the black hatch cover from a boat supply or homemade?

: Ian

Thank you Ian. This is a link to the seat: http://www.noahsboatbuilding.com/noahmain/itemdesc.asp?ic=SEAT1LB&eq=&Tp=
This one shows the type of cleat used: http://www.blyachting.com/deck-hardware/cleats-rope-clutches-eye-straps-pad-eyes/cleats/clamcleat-cl203-1.html
This shows the deckplates I used in the two floatation chambers: http://www.blyachting.com/hardware/deck-plates-and-vents/deck-plates/deck-plate-4-black.html
I used the design of a Bear Mountain Resolute and modified the deck to suit my needs.
Unfortunately I am unable to use the boat for health reasons so it has been sitting in the shed since 2008.

Messages In This Thread

Re: Strip: Seat advice wanted for MicroBootlegger *PIC*
Glen Smith -- 9/27/2011, 7:38 pm
Re: Strip: Seat advice wanted for MicroBootlegger
Ian Cummins -- 9/27/2011, 8:08 pm
Re: Strip: Seat advice wanted for MicroBootlegger
Glen Smith -- 9/27/2011, 8:27 pm