: Historic Greenland kayaks do not have a lip. The tuilik was tied to
: the coaming so tightly that it would seal out the water. That's
: one of the reasons why rolling was so important- really hard to
: get out again.

: I would at least put a riser on because it would give you the
: option of using a spray deck of some kind without as great a
: fear of entrapment. IMO- kayaking is WAY more fun when water
: from your paddle isn't running all over your legs every time you
: dip your paddle in the water.

: I really like a composite coaming of some kind- but I didn't like
: all of the steps of "Vaclav's method." On mine I made
: a sacrificial mold of minicell temporarily glued to the hull
: with repositionable spray adhesive, then I covered it with
: aluminum foil I had coated with mold release wax. I used biaxial
: CF tape, when I was done laying it up I pulled the foam away,
: leaving the coaming.

: m

Hi Mike,

I have an untried design for a new easier to make CF coaming, going to try it on Bryan's design this winter. If it works out, I'll show everyone how :)

Bill H.