Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Adding flotation
By:James Adams
Date: 10/24/2011, 12:07 pm
In Response To: Re: Skin-on-Frame: Adding flotation (StephenHJ)

Stephen,
Thanks for your quick and helpful reply. Float bags it is. I'll search through the forums. I may have a follow up question later on. Again, thanks a bunch!
Jim

: Hi Jim,
: 1) Adding floatation won't make the kayak more stable. It's inside
: the boat, so is already part of the boat's stability equation.
: 2) Floatation is a must, as if the paddler goes in and wet-exits
: (has to get out of the boat and back in again), the kayak will
: fill with water without it. (The point of the floatation is to
: displace water.)
: 3) The reason float bags are preferred for SOF is that when water
: gets into the hull, the float bags can be deflated to allow the
: hull to dry. If you don't allow the hull to dry, stuff grows
: inside, and gets really gross (as well as damaging the boat.)

: There have been discussions about this before on this forum, and
: float bags really are the best option. You can even make your
: own for a very low cost, using water-proof nylon with a
: heat-sensitive glue on one side.

: StephenHJ

Messages In This Thread

Skin-on-Frame: Adding flotation
James Adams -- 10/24/2011, 11:49 am
Re: Skin-on-Frame: Adding flotation
StephenHJ -- 10/24/2011, 12:02 pm
Re: Skin-on-Frame: Adding flotation
James Adams -- 10/24/2011, 12:07 pm
Re: Skin-on-Frame: Adding flotation
Eric Mattison -- 10/24/2011, 5:44 pm
Re: Skin-on-Frame: Adding flotation
jim adams -- 10/24/2011, 5:50 pm
Re: Skin-on-Frame: Adding flotation
Eric Mattison -- 10/24/2011, 7:41 pm
Re: Skin-on-Frame: Adding flotation
jim adams -- 10/24/2011, 8:40 pm
Re: Skin-on-Frame: Adding flotation
Scott Shurlow -- 10/25/2011, 12:24 am
Re: Skin-on-Frame: Adding flotation
Dave Gentry -- 10/25/2011, 9:51 am
Re: Skin-on-Frame: Adding flotation
Matthias -- 10/28/2011, 2:17 am
Re: Skin-on-Frame: Adding flotation
Jim -- 10/28/2011, 9:24 am
Re: Skin-on-Frame: Adding flotation
davekoz -- 10/28/2011, 10:37 am
Re: Skin-on-Frame: Adding flotation
Matthias -- 10/29/2011, 12:28 pm
Re: Skin-on-Frame: Adding flotation
Ken Blanton -- 10/29/2011, 6:03 pm