: I got the strongback trimmed and shaped and got all the forms cut
: out and placed on it. I still have to align them and fasten them
: to it permanently, but this is a big step. I can finally see
: what it's going to look like. you can read more about it here:
: http://thetoughline.com/?p=175

The forms look correctly aligned to me. I am building the Guillemot L.

I read your blog post. Once I had the roughed out the hole in each form with saber saw, I made a router template and used 1/2" bit to get all the holes the same size. When I slide them on the strongback they lined up nicely, such that only 2 forms needed a business card shim to bring them into alignement with rest.

When stripping I found that the first 6 strips of the hull are the hardest to get right.

John