: Use PL Premium. Its usually used for attaching sub-floors and
: decks. Its urethane based like gorilla glue but is mixed with a
: filler so it gap fills up to about a quarter inch. It comes in a
: caulking tube, will cure in cold temperatures, moisture actually
: helps it cure (the specs say no standing water, but other than
: that it doesn't care). Also has a high initial tack, but if its
: something really awkward I just use duct or masking tape to hold
: it all together while it sets.
: I love the stuff. I have a SOF cockpit coaming I laminated with the
: stuff 3 years ago that's still going strong, and I had like
: 1/8th inch gaps between the lamination.
: Oh, and wear gloves, it sticks to your skin like crazy, then causes
: any dirt to stick to it. Hands end up black for almost a week.

Actually PL Premium will very likely work fine, much less expensive too. I keep forgetting about this stuff since it's not a boat building glue, but for deck construction should work great.

Bill H.