Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Carbon Fiber on the Inside
By:Brian Nystrom
Date: 12/1/2011, 6:30 am
In Response To: Strip: Carbon Fiber on the Inside (Bryan Hansel)

In addition to what the others have said, carbon fiber has rather poor abrasion resistance, so it should be covered with an abrasion layer wherever anything is going to rub against it.

Messages In This Thread

Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 9:57 am
Re: Strip: Carbon Fiber on the Inside
Charlie -- 11/30/2011, 10:51 am
Re: Strip: Carbon Fiber on the Inside
Malcolm Schweizer -- 11/30/2011, 1:23 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 3:37 pm
Re: Strip: Carbon Fiber on the Inside
StephenHJ -- 11/30/2011, 1:37 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 11/30/2011, 3:38 pm
Re: Strip: Carbon Fiber on the Inside
ScottBaxter -- 11/30/2011, 7:22 pm
Re: Strip: Carbon Fiber on the Inside
ancient kayaker -- 11/30/2011, 11:22 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 1:59 pm
Re: Strip: Carbon Fiber on the Inside
Brian Nystrom -- 12/1/2011, 6:30 am
Re: Strip: Carbon Fiber on the Inside
Mike Savage -- 12/1/2011, 1:57 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 2:03 pm
Re: Strip: Carbon Fiber on the Inside
Allan -- 12/1/2011, 4:51 pm
Re: Strip: Carbon Fiber on the Inside
Bryan Hansel -- 12/1/2011, 5:28 pm
Re: Strip: Carbon Fiber on the Inside
Robert N Pruden -- 12/1/2011, 6:55 pm
Re: Strip: Carbon Fiber on the Inside
Etienne Muller -- 12/2/2011, 3:21 am
Re: Strip: Carbon Fiber on the Inside
Kirk Briggs -- 12/3/2011, 9:44 am
Re: Strip: Carbon Fiber on the Inside
Paul G. Jacobson -- 12/9/2011, 2:30 pm