Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Some advice for a strip kayak
By:Yostwerks
Date: 1/7/2012, 9:42 am
In Response To: Strip: Some advice for a strip kayak (Margosia)

: When I got the boat, the deck and hull pretty much constructed, and had been separated from the form.

Why was the hull removed from the forms before sanding and glassing the outside ? Sanding / glassing needs to be done while still on the strongback before being removed and turned over for finishing the inside of the hull and deck. Perhaps I'm not reading this correctly.

Tom

Messages In This Thread

Strip: Some advice for a strip kayak
Margosia -- 1/7/2012, 9:24 am
Re: Strip: Some advice for a strip kayak
Yostwerks -- 1/7/2012, 9:42 am
Re: Strip: Some advice for a strip kayak
Yostwerks -- 1/7/2012, 10:00 am
Re: Strip: Some advice for a strip kayak
Mike Bielski -- 1/7/2012, 10:20 am
Re: Strip: Some advice for a strip kayak
Etienne Muller -- 1/7/2012, 12:10 pm
Re: Strip: Some advice for a strip kayak
Margosia -- 1/7/2012, 12:12 pm
Re: Strip: Some advice for a strip kayak
Etienne Muller -- 1/7/2012, 12:20 pm
Re: Strip: Some advice for a strip kayak
Mike Bielski -- 1/7/2012, 1:36 pm
Re: Strip: Some advice for a strip kayak
Kirk Fredericks -- 1/7/2012, 6:11 pm
Re: Strip: Some advice for a strip kayak
Etienne Muller -- 1/7/2012, 10:04 pm
Re: Strip: Some advice for a strip kayak
Bill Hamm -- 1/8/2012, 2:43 am
Re: Strip: Some advice for a strip kayak
Robert l -- 1/9/2012, 11:53 pm