Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: First time builder *PIC*
By:ancient kayaker
Date: 1/22/2012, 11:32 pm
In Response To: Skin-on-Frame: First time builder (stefalo)

: . . . Has anyone had luck using 1/16" strips laminated strips for
: ribs. I was hoping that laminating thinner strips would keep me
: from having to steam the ribs . . .

: Stefan

I made the ribs of my stripper canoe using 3 laminations of 1/8" pine. It was time consuming, making a bending jig, ripping all the laminations and gluing them up, but most of the time was waiting for glue to set and cleaning up and rounding over the inside edges didn’t take long with a bench sander and router, about 1 hour.

The canoe is a constant camber design so all the ribs are identical and I could use a common bending jig which did several ribs at a time. Laminating is very accurate and I erected them on a keel and glued on the strips without using a building form.

Steaming would be easier and quicker for you than laminating since each rib is different and you would need to make a different jig for each one.

Terry

Messages In This Thread

Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 1:06 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:07 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:08 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 3:16 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 4:10 am
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 6:04 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/22/2012, 7:14 am
Re: Skin-on-Frame: First time builder
Dave Gentry -- 1/22/2012, 7:54 am
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 9:37 am
Re: Skin-on-Frame: First time builder
Brian Nystrom -- 1/22/2012, 12:55 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:02 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 5:51 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:06 pm
About the glue laming..
David Bynoe -- 1/22/2012, 7:08 pm
Re: About the glue laming..
Jeff Soper -- 2/5/2012, 1:13 am
Re: About the glue laming..
stefalo -- 2/8/2012, 11:09 pm
Re: About the glue laming..
Mike Savage -- 2/9/2012, 4:00 am
Re: About the glue laming..
stefalo -- 2/9/2012, 12:18 am
Re: About the glue laming..
Jeff Soper -- 2/14/2012, 5:27 pm
Re: About the glue laming..
Bill Hamm -- 2/15/2012, 2:03 am
Re: About the glue laming..
Jeff Soper -- 2/20/2012, 9:50 pm
Re: About the glue laming..
Bill Hamm -- 2/26/2012, 3:47 am
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:55 am
Re: About the glue laming..
Mike Savage -- 2/9/2012, 2:23 pm
Re: About the glue laming..
John Abercrombie -- 2/9/2012, 3:51 pm
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:12 pm
Re: About the glue laming..
Mike Savage -- 2/10/2012, 6:04 am
Re: Skin-on-Frame: First time builder *PIC*
ancient kayaker -- 1/22/2012, 11:32 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/23/2012, 2:06 am
Re: Skin-on-Frame: First time builder
Kent LeBoutillier -- 1/23/2012, 11:57 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/23/2012, 5:39 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/23/2012, 9:58 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/24/2012, 2:35 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/24/2012, 12:21 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/24/2012, 2:21 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 12:55 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/25/2012, 6:07 pm
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 10:28 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/24/2012, 4:58 pm