Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: First time builder
By:Bill Hamm
Date: 1/23/2012, 2:06 am
In Response To: Re: Skin-on-Frame: First time builder *PIC* (ancient kayaker)

: I made the ribs of my stripper canoe using 3 laminations of
: 1/8" pine. It was time consuming, making a bending jig,
: ripping all the laminations and gluing them up, but most of the
: time was waiting for glue to set and cleaning up and rounding
: over the inside edges didn’t take long with a bench sander and
: router, about 1 hour.

: The canoe is a constant camber design so all the ribs are identical
: and I could use a common bending jig which did several ribs at a
: time. Laminating is very accurate and I erected them on a keel
: and glued on the strips without using a building form.

: Steaming would be easier and quicker for you than laminating since
: each rib is different and you would need to make a different jig
: for each one.

: Terry

Actually, assuming you have the time, you can re-make forms for smaller ribs using the big (middle) rib's forms for materials. Saves a bunch on materials.

It all depends on what you're comfortable with. Sure laminating takes time, but it's pretty easy too.

Bill H.

Messages In This Thread

Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 1:06 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:07 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 3:08 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/22/2012, 3:16 am
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/22/2012, 4:10 am
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 6:04 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/22/2012, 7:14 am
Re: Skin-on-Frame: First time builder
Dave Gentry -- 1/22/2012, 7:54 am
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 9:37 am
Re: Skin-on-Frame: First time builder
Brian Nystrom -- 1/22/2012, 12:55 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:02 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/22/2012, 5:51 pm
Re: Skin-on-Frame: First time builder
Paul Montgomery -- 1/22/2012, 8:06 pm
About the glue laming..
David Bynoe -- 1/22/2012, 7:08 pm
Re: About the glue laming..
Jeff Soper -- 2/5/2012, 1:13 am
Re: About the glue laming..
stefalo -- 2/8/2012, 11:09 pm
Re: About the glue laming..
Mike Savage -- 2/9/2012, 4:00 am
Re: About the glue laming..
stefalo -- 2/9/2012, 12:18 am
Re: About the glue laming..
Jeff Soper -- 2/14/2012, 5:27 pm
Re: About the glue laming..
Bill Hamm -- 2/15/2012, 2:03 am
Re: About the glue laming..
Jeff Soper -- 2/20/2012, 9:50 pm
Re: About the glue laming..
Bill Hamm -- 2/26/2012, 3:47 am
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:55 am
Re: About the glue laming..
Mike Savage -- 2/9/2012, 2:23 pm
Re: About the glue laming..
John Abercrombie -- 2/9/2012, 3:51 pm
Re: About the glue laming..
ancient kayaker -- 2/9/2012, 10:12 pm
Re: About the glue laming..
Mike Savage -- 2/10/2012, 6:04 am
Re: Skin-on-Frame: First time builder *PIC*
ancient kayaker -- 1/22/2012, 11:32 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/23/2012, 2:06 am
Re: Skin-on-Frame: First time builder
Kent LeBoutillier -- 1/23/2012, 11:57 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/23/2012, 5:39 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/23/2012, 9:58 pm
Re: Skin-on-Frame: First time builder
Bill Hamm -- 1/24/2012, 2:35 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/24/2012, 12:21 am
Re: Skin-on-Frame: First time builder
Matthias -- 1/24/2012, 2:21 am
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 12:55 am
Re: Skin-on-Frame: First time builder
stefalo -- 1/25/2012, 6:07 pm
Re: Skin-on-Frame: First time builder
ancient kayaker -- 1/25/2012, 10:28 pm
Re: Skin-on-Frame: First time builder
Ken Blanton -- 1/24/2012, 4:58 pm