Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Fiberglass / resin
By:Charles Robinson
Date: 1/24/2012, 7:42 pm
In Response To: Re: Material: Fiberglass / resin (Eric Mattison)

: I just want to put a plug in for 6oz cloth on the outside. I have
: cracked my hull twice over the years. Once was on a submerged
: rock in Deception Pass with a fully loaded boat. The second was
: a very hard shore landing in the Ross Lake Wilderness area. In
: both cases I was able to complete the trips with minor temporary
: repairs. I've ended up putting an additional strip of glass tape
: on the hull.

: My boats might have been fine with the lighter cloth, but why risk
: it?

: Eric M.

In Nick's book he notes that the fiberglass on the outside of the boat only protects from abrasion but the fiberglass on the inside is the one that protects the hull from cracking. Therefore if you want the heavier fiberglass, it should probably go on the inside.

Charles Robinson

Messages In This Thread

Material: Fiberglass / resin
Chris Wynne -- 1/9/2012, 7:17 pm
Re: Material: Fiberglass / resin
Allan -- 1/9/2012, 8:38 pm
Re: Material: Fiberglass / resin
Robert l -- 1/9/2012, 11:22 pm
Re: Material: Fiberglass / resin
Chris -- 1/24/2012, 6:16 pm
Re: Material: Fiberglass / resin
Kevin Greer -- 1/25/2012, 6:48 pm
Re: Material: Fiberglass / resin
John Abercrombie -- 1/26/2012, 12:30 am
Tight weave cloth
Dan Caouette (CSFW) -- 1/26/2012, 8:58 am
Re: Material: Fiberglass / resin
Bill Hamm -- 1/30/2012, 5:29 am
Re: Material: Fiberglass / resin
John Abercrombie -- 1/30/2012, 11:19 am
Re: Material: Fiberglass / resin
Bill Hamm -- 1/31/2012, 3:50 am
Re: Material: Fiberglass / resin
Bill Hamm -- 1/31/2012, 3:52 am
Re: Material: Fiberglass / resin
Bryan Hansel -- 1/25/2012, 8:43 pm
Re: Material: Fiberglass / resin
Allan -- 1/25/2012, 8:51 pm
Re: Material: Fiberglass / resin
Bryan Hansel -- 1/26/2012, 12:19 am
Re: Material: Fiberglass / resin
Allan -- 1/26/2012, 4:06 am
Re: Material: Fiberglass / resin
Bryan Hansel -- 1/26/2012, 9:15 am
Re: Material: Fiberglass / resin
Rod Tait (Orca Boats) -- 1/10/2012, 10:43 am
Re: Material: Fiberglass / resin
Eric Mattison -- 1/24/2012, 6:32 pm
Re: Material: Fiberglass / resin
Charles Robinson -- 1/24/2012, 7:42 pm
Re: Material: Fiberglass / resin
Eric Mattison -- 1/24/2012, 8:00 pm
Re: Material: Fiberglass / resin
Bill Hamm -- 1/31/2012, 3:41 am
Re: Material: Fiberglass / resin
ancient kayaker -- 1/25/2012, 12:54 am
Re: Material: Fiberglass / resin
Rob Macks/Laughing Loon CC&K -- 1/26/2012, 12:32 pm
Re: Material: Fiberglass / resin
ancient kayaker -- 1/26/2012, 5:11 pm
Re: Material: Fiberglass / resin
Dean -- 1/26/2012, 2:17 pm