Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: plywood usage/scarfing
By:Mike Bielski
Date: 1/30/2012, 1:02 pm
In Response To: Re: S&G: plywood usage/scarfing (Dan Caouette (CSFW))

: 8/4 doesn't afford the same cost savings for me. Clear cedar is
: tough to come by.

That would be for basswood. If I'm not doing bright I wouldn't use good cedar. Basswood is local, cheap, light, and strong. Easy to sand and plane.

: Not a bad idea. The non-clear hardeners are usually cheaper and
: stronger to boot. The really cheap hardeners can blush like
: crazy though... Let us know what you end of going with.

The other thing is a spray-on (If I stick with Awlcraft as a topcoat) or roll on fairing filler over the simply laminated fiberglass, rather than multiple fill coats of just epoxy. Just like auto body work. Faster, and easier to sand. With the spray-on there wouldn't be bubbles to worry about, either, so no worries about filling or missing pinholes before spraying. It would speed things up and make the final finish more predictable and higher quality.

m

Messages In This Thread

S&G: plywood usage/scarfing
Mike Bielski -- 1/27/2012, 9:26 am
Re: S&G: plywood usage/scarfing
ancient kayaker -- 1/27/2012, 10:27 am
Re: S&G: plywood usage/scarfing
Etienne Muller -- 1/27/2012, 1:26 pm
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/27/2012, 2:46 pm
Re: S&G: plywood usage/scarfing
Etienne Muller -- 1/27/2012, 4:33 pm
Re: S&G: plywood usage/scarfing
John Abercrombie -- 1/27/2012, 4:35 pm
Re: S&G: plywood usage/scarfing
John Abercrombie -- 1/27/2012, 1:33 pm
Re: S&G: plywood usage/scarfing
Robert N Pruden -- 1/28/2012, 8:23 pm
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/28/2012, 11:30 pm
Re: S&G: plywood usage/scarfing
Robert N Pruden -- 1/28/2012, 11:35 pm
Re: S&G: plywood usage/scarfing
John Abercrombie -- 1/29/2012, 12:53 pm
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/29/2012, 1:12 pm
Re: S&G: plywood usage/scarfing
John Abercrombie -- 1/29/2012, 1:53 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 1/30/2012, 7:39 am
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/30/2012, 10:16 am
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 1/30/2012, 10:29 am
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/30/2012, 1:02 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 1/30/2012, 2:10 pm
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/30/2012, 9:15 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 1/31/2012, 7:49 am
Re: S&G: plywood usage/scarfing
Mike Bielski -- 1/31/2012, 7:20 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 2/2/2012, 2:05 pm
Re: S&G: plywood usage/scarfing
Bill Hamm -- 2/1/2012, 2:52 am
Re: S&G: plywood usage/scarfing
Mike Bielski -- 2/1/2012, 8:52 am
Re: S&G: plywood usage/scarfing
Bill Hamm -- 2/2/2012, 3:48 am
Re: S&G: plywood usage/scarfing
John Abercrombie -- 2/2/2012, 1:32 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 2/2/2012, 2:07 pm
Re: S&G: plywood usage/scarfing
Mike Bielski -- 2/2/2012, 3:01 pm
Re: S&G: plywood usage/scarfing
Bill Hamm -- 2/2/2012, 3:43 pm
Re: S&G: plywood usage/scarfing
Bill Hamm -- 2/2/2012, 3:42 pm
Re: S&G: plywood usage/scarfing
Bill Hamm -- 2/2/2012, 3:40 pm
Re: S&G: plywood usage/scarfing
Paul Sylvester -- 2/2/2012, 8:06 pm
Re: S&G: plywood usage/scarfing
Dan Caouette (CSFW) -- 2/3/2012, 5:23 am