: I have joined the deck to the hull of my Guillemot L. The selvage
: edge is quite sharp in the forward areas where I cannot reach
: with my hand and sandpaper. Any hints/tips on what folks have
: used to hang onto the sandpaper so that these areas can be
: sanded?
: I am worried about sharp edges snagging stuff sacks and other
: camping gear.
I epoxied a film canister (plastic) to a strong piece of doweling. It was ideal for rolling out the tape. Although I didn't actually need to, it would be easy to glue some sandpaper to it to knock rough edges off.
Failing that, I'd have thought that any strong bit of wood a couple of feet long, with a bit of sandpaper on a shaped end would do. From the bow to the forward hatch is no more than about 5 feet I think on my Guillemot, so a two foot bit of wood plus my arm would easily reach further forward than any stuff sack etc could
Cheers, Ian
Messages In This Thread
- Strip: Sanding Device for the Bow & Stern
John Messinger -- 3/4/2012, 6:00 pm- Re: Strip: Sanding Device for the Bow & Stern
Ric Moodie -- 3/4/2012, 6:26 pm- Re: Strip: Sanding Device for the Bow & Stern
Ian Johnson -- 3/5/2012, 2:48 am- Re: Strip: Sanding Device for the Bow & Stern
John Messinger -- 3/5/2012, 5:51 am- Re: Strip: Sanding Device for the Bow & Stern
John Messinger -- 3/5/2012, 6:32 pm - Re: Strip: Sanding Device for the Bow & Stern
- Re: Strip: Sanding Device for the Bow & Stern