: OK I am onto the bottom of the boat now. I want to put a keel strip
: down each side of the keel. So when these strips come to the bow
: stem should they lay straight? I would have to trim both edges.
: The lower edge to join the last strip on the side and then trim
: what is sticking out past the stem. Or make a bend right at the
: end so the Keel strip follows the stem? And just trim the lower
: edge to match last strip.

: I better go watch that video again.

: Mike

Keel strip is normally on the keel, not off to one side. If it's made of bias cut glass it can run right up the stems.

Bill H.