Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: tubing and back blocks
By:Etienne Muller
Date: 5/30/2012, 9:09 am
In Response To: tubing and back blocks (William Mayberry)

: Dear Mr. ET,

: Are those clear tubes made of PVC? Also, it looks like you have a
: backing block to encase the tubing. Do you split a block of wood
: in half and rout a channel for the tube, then
: reassemble...filling voids with epoxy and then gluing the whole
: thing to the under deck....:)

: Thanks,
: Bill

Clear Unreinforced Flexible PVC Tubing 4mm 6mm outside Inside Diameter

I got a whole roll on eBay. It was cheap.

Under the deck I used a mixture of wood dust from my sander and microbaloons to make up an epoxy putty and bogged it around the tubes in lumps. While it was still damp I put an oval of 6oz glass over the lump and over coated that with a little more resin.

I could probably have made the lumps a little smaller, but the extra weight is literally a couple of ounces for slightly heftier lumps.

Getting the tubes out was easiest to do in a controlled way by grabbing the long end of the tube in the middle of some long nosed pliers, resting the end of the pliers on a block of wood to get clearance and protect the deck from the pliers, and roll the pliers, winding the tube around the jaws, thus adding controlled pressure. This way the tube stretches and slides out, rathe than suddenly jerking out and putting you on your ass on the floor and the deck in the rafters.

Et

Messages In This Thread

Strip: flush deck fittings
Andrew T -- 5/29/2012, 1:25 pm
Re: Strip: flush deck fittings
Malcolm Schweizer -- 5/29/2012, 2:03 pm
Re: Strip: flush deck fittings
Marc Upchurch -- 5/29/2012, 8:28 pm
Re: Strip: flush deck fittings
John Abercrombie -- 5/29/2012, 11:56 pm
Re: Strip: flush deck fittings
george jung -- 5/30/2012, 7:05 pm
Re: Strip: flush deck fittings
John Abercrombie -- 5/30/2012, 9:04 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 3:56 am
Re: Strip: flush deck fittings
Etienne Muller -- 5/31/2012, 4:00 am
Re: Strip: flush deck fittings
Erik J -- 5/31/2012, 1:34 am
Re: Strip: flush deck fittings
george jung -- 5/31/2012, 8:57 am
Re: Strip: flush deck fittings
Sean Dawe -- 5/31/2012, 9:18 am
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:10 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:14 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/31/2012, 2:19 pm
Re: Strip: flush deck fittings
Sean Dawe -- 5/31/2012, 2:25 pm
Re: Strip: flush deck fittings
Etienne Muller -- 5/31/2012, 2:29 pm
Re: Strip: flush deck fittings
Mike M -- 6/1/2012, 9:19 am
Re: Strip: flush deck fittings
Etienne Muller -- 6/1/2012, 4:08 pm
Re: Strip: flush deck fittings
Mike M -- 6/2/2012, 11:03 am
Re: Strip: flush deck fittings
Will N 2Go -- 5/31/2012, 10:06 pm
Re: Strip: flush deck fittings *PIC*
Etienne Muller -- 5/29/2012, 3:00 pm
Re: Strip: flush deck fittings *NM* *PIC*
Etienne Muller -- 5/29/2012, 3:01 pm
Re: Strip: flush deck fittings *NM* *PIC*
Etienne Muller -- 5/29/2012, 3:03 pm
Re: Strip: flush deck fittings
Paul Davies -- 5/29/2012, 7:08 pm
Re: Strip: flush deck fittings
Etienne Muller -- 5/30/2012, 6:24 am
Re: Strip: flush deck fittings
Paul Davies -- 5/30/2012, 2:01 pm
tubing and back blocks
William Mayberry -- 5/30/2012, 8:53 am
Re: tubing and back blocks
Etienne Muller -- 5/30/2012, 9:09 am
Re: tubing and back blocks
William Mayberry -- 5/30/2012, 1:05 pm
Re: tubing and back blocks *PIC*
Etienne Muller -- 5/30/2012, 1:23 pm
Re: tubing and back blocks
Randy Echtinaw -- 6/1/2012, 2:45 pm
Re: tubing and back blocks *PIC*
Etienne Muller -- 6/1/2012, 4:45 pm
Re: Strip: flush deck fittings
Ian Cummins -- 5/29/2012, 7:34 pm
Re: Strip: flush deck fittings
Sean Dawe -- 5/29/2012, 7:39 pm
Re: Strip: flush deck fittings
Al Edie -- 5/30/2012, 12:00 am
Re: Strip: flush deck fittings *PIC*
Sean Dawe -- 5/30/2012, 7:43 am
Re: Strip: flush deck fittings
Mike M -- 5/30/2012, 9:38 am
Re: Strip: flush deck fittings
Etienne Muller -- 5/30/2012, 9:42 am
Re: Strip: flush deck fittings
Al Edie -- 5/30/2012, 10:43 am
Re: Strip: flush deck fittings
Mike M -- 5/30/2012, 12:19 pm
Re: Strip: flush deck fittings *PIC*
Sean Dawe -- 5/30/2012, 1:10 pm
Re: Strip: flush deck fittings
Ric Moodie -- 5/30/2012, 1:53 pm
Re: Strip: flush deck fittings
Dan Caouette -- 5/30/2012, 9:59 pm
Re: Strip: flush deck fittings *PIC*
Andrew T -- 6/1/2012, 6:17 pm
Re: Strip: flush deck fittings *PIC*
Andrew T -- 6/1/2012, 6:19 pm
Re: Strip: flush deck fittings
Ric Moodie -- 6/1/2012, 8:16 pm
Re: Strip: flush deck fittings
Mike Savage -- 6/2/2012, 7:43 am