: Do yourself a big favor and skip the cove and bead route.

: Milling C&B properly is one of the fussiest things you can do with
: a router.

: I bet 90%+ people don't get it right the first time. I didn't. And
: I didn't throw those strips away.

: If you don't get them right you defeat the whole purpose and you've
: just made your work harder.

: Pre-bevel one edge of your strips on the table saw and hand bevel
: the rest.
: It's much faster and easier and you'll have your hull stripped in
: the time you
: would spend fussing with C&B.

: Check this for details: http://www.laughingloon.com/shoptips3.html

: All the best,
: Rob

*************************************

Trust Rob on this one. I built one of his NorthStars last year and skipped the B/C and did the pre-bevel with hand bevel to fit and had a very easy time with great results. A friend of mine built a stripper with B/C and had all kinds of problems, he wished he had followed my lead.

Good luck,
B. Abel