: I took at look at my ACME belt sander. It's a 3/4 hp 1725 rpm
: motor. It's a direct drive, not pulleys. Just a 6 in(?) dia.
: rubber wheel on the motor. It take a heavy and long cut to stall
: it out. This is not mine, but it looks just like it except blue
: and dusty.

: I still think a 1/2 hp would OK on yours. You might stall it
: occasionally but sharp sandpaper makes a big difference.

: There are a few of us that like to restore and use old machines and
: I am one. I am not familiar with that sander but generally the
: older stuff, even the cheap ones are better than most new stuff
: unless you get into the higher end products. Sure you can go buy
: one at the BORG but assuming no hidden problems you will
: probably have a much better unit there once you get it done.
: Have to watch it, it is as addicting as building boats.

That's a slick sander, simple but effective.

Thank you for your help!
Bill