Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Sheer Strip problem
By:Mike
Date: 7/30/2012, 12:37 am
In Response To: Re: Strip: Sheer Strip problem (Charlie)

: I'm confused about how the glue gets in the way. Are you gluing the
: sheer strip to the station molds?

Well that's what I did in the first place....but as I worked along it popped apart here and there. So then I glued the two sheer strips to each other on the surface. I think the hull is still glued to the form. But the deck isn't at all at the sheer strip. The center line is glued down to the mold. But the deck is hot glued to the hull sheer strip on the surface.

I hope it makes sense now.

Thanks

Mike

Messages In This Thread

Strip: Sheer Strip problem
Mike -- 7/29/2012, 10:49 pm
Re: Strip: Sheer Strip problem
Charlie -- 7/30/2012, 12:14 am
Re: Strip: Sheer Strip problem
Mike -- 7/30/2012, 12:37 am
Re: Strip: Sheer Strip problem
Rod Tait (Orca Boats) -- 7/30/2012, 10:19 am
Re: Strip: Sheer Strip problem
Mike -- 7/30/2012, 11:02 am
Re: Strip: Sheer Strip problem
Rod Tait (Orca Boats) -- 7/30/2012, 11:04 am
Re: Strip: Sheer Strip problem
Mike -- 7/30/2012, 12:28 pm
Re: Strip: Sheer Strip problem
Robert l -- 7/30/2012, 12:36 pm
Re: Strip: Sheer Strip problem
John Abercrombie -- 7/30/2012, 2:54 pm
Re: Strip: Sheer Strip problem
Etienne Muller -- 7/30/2012, 2:41 pm
Re: Strip: Sheer Strip problem
Mike -- 7/30/2012, 5:20 pm
Re: Strip: Sheer Strip problem
Etienne Muller -- 7/30/2012, 6:01 pm
Re: Strip: Sheer Strip problem
Robert l -- 7/30/2012, 6:40 pm
Re: Strip: Sheer Strip problem
Mike -- 7/30/2012, 10:21 pm
Re: Strip: Sheer Strip problem
Rod Tait (Orca Boats) -- 7/30/2012, 11:36 pm
Re: Strip: Sheer Strip problem
Etienne Muller -- 7/31/2012, 4:35 am