Looks great Etienne,

Doesn't glassing over the installed fittings risk getting drips inside the tubes?
Was this a concern? Was there a reason for installing the fittings before glassing?

I like these fittings because after pulling the PTFE Wrapped mini-glue sticks is that the insides are smooth and the same dimension (I've easily pushed through unraveling deck line with no problem.) When I add a finish coat of epoxy I plug the holes with cut off bits of mini-glue sticks.

: No, I installed the fittings after the inside of the deck was
: glassed, but before the outside was glassed. I then glassed
: right over the holes, fill coats and all, sanded and varnished.
: Then I drilled out the glass covering the holes. If you want to
: see the process click on the link.

:
: https://www.facebook.com/media/set/?set=a.294162110644609.70943.100001524683106&type=3&l=1da2a6f35a

: Et