Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Minicell foot holds
By:Brian Hanks
Date: 8/1/2012, 9:17 pm
In Response To: Strip: Minicell foot holds (Andrew T)

: Am I way off thinking I could cut/carve wedges of this
: foam placed against the front bulkhead as holds? I haven't
: sealed either bulkhead yet and could push it for or aft if need
: be. Seems like it would be kind of comfy on the toes and still
: do a fair job.

I like the foam block foot bracing in Fishstalker. The foam gets wedged in and I wind up with a large area to work with. I say if you have the foam go for it. Worst case is you decide you don't like it and have to figure something else out later.

Brian

Messages In This Thread

Strip: Minicell foot holds
Andrew T -- 8/1/2012, 9:07 pm
Re: Strip: Minicell foot holds
Brian Hanks -- 8/1/2012, 9:17 pm
Re: Strip: Minicell foot holds
Robert l -- 8/2/2012, 12:31 am
Re: Strip: Minicell foot holds
Ken Blanton -- 8/2/2012, 4:29 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/2/2012, 7:27 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/2/2012, 7:33 am
Re: Strip: Minicell foot holds
Bob Beaullieu -- 8/2/2012, 11:31 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/3/2012, 8:20 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/3/2012, 8:25 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/3/2012, 8:28 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/3/2012, 8:32 am
Re: Strip: Minicell foot holds
Bob Beaullieu -- 8/3/2012, 8:32 am
Re: Strip: Minicell foot holds
Etienne Muller -- 8/3/2012, 8:46 am
Re: Strip: Another approach *PIC*
Bob Beaullieu -- 8/3/2012, 8:47 am
Re: Strip: Another approach *PIC*
Etienne Muller -- 8/3/2012, 9:03 am
Re: Strip: Minicell foot holds
Gelu Botezan -- 8/4/2012, 1:14 am
Re: Strip: Minicell foot holds *PIC*
Etienne Muller -- 8/4/2012, 4:53 am
Re: Strip: Minicell foot holds *PIC*
Andrew T -- 8/2/2012, 8:08 pm
Re: Strip: Minicell foot holds
Bill Hamm -- 8/5/2012, 2:06 am