Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Why 6 coats?
By:Bill Hamm
Date: 8/23/2012, 6:14 am
In Response To: Re: Why 6 coats? (Rod Tait (Orca Boats))

: "Your boats look great. "

: That depends on how close you are, but I use Epiphanes Rapid Clear
: for the quick coats and Captains for the high gloss. I like the
: rollers because I rarely miss a spot or get brush streaks, and
: it goes on even with very few runs or sags.

I roll and tip my varnish too, I find I can do one side fast enough that I still have a wet edge doing the 2nd. side. Doesn't take real long to varnish a boat this way, perhaps 15 minutes tops.

Bill H.

Messages In This Thread

Material: Marine grade spar varnish?????
Chris Wynne -- 8/17/2012, 4:19 pm
Re: Material: Marine grade spar varnish?????
Ric Moodie -- 8/17/2012, 4:43 pm
Re: Material: Marine grade spar varnish?????
Chris -- 8/17/2012, 5:21 pm
Re: Material: Marine grade spar varnish?????
Ric Moodie -- 8/17/2012, 6:33 pm
Re: Material: Marine grade spar varnish?????
Jeff Horton -- 8/19/2012, 5:44 pm
Re: Material: Marine grade spar varnish????? *PIC*
robert l -- 8/18/2012, 12:26 am
Re: Material: Marine grade spar varnish?????
Randy Echtinaw -- 8/18/2012, 10:26 am
Re: Material: Marine grade spar varnish?????
John Abercrombie -- 8/18/2012, 4:24 pm
Why 6 coats?
Jay Babina -- 8/18/2012, 12:43 pm
Re: Why 6 coats?
Sodbuster------WebKitFormBoundary6pLaVD9X7Zfw4+Pi- -- 8/18/2012, 2:16 pm
Re: Why 6 coats?
Etienne Muller -- 8/18/2012, 3:23 pm
Re: Why 6 coats?
John Abercrombie -- 8/18/2012, 4:25 pm
Re: Why 6 coats?
ancient kayaker -- 8/18/2012, 10:46 pm
Re: Why 6 coats?
Etienne Muller -- 8/19/2012, 6:09 am
Re: Why 6 coats?
ancient kayaker -- 8/19/2012, 8:23 am
Re: Why 6 coats?
Dan Caouette -- 8/19/2012, 8:42 am
Re: Why 6 coats?
Etienne Muller -- 8/19/2012, 8:55 am
Re: Why 6 coats?
Dan Caouette -- 8/19/2012, 10:34 am
Re: Why 6 coats?
Bill Hamm -- 8/20/2012, 2:14 am
Re: Why 6 coats?
Robert l -- 8/20/2012, 7:24 pm
Re: Why 6 coats?
Jim Schaffer -- 8/21/2012, 7:53 pm
Re: Why 6 coats?
John Abercrombie -- 8/21/2012, 8:14 pm
Re: Why 6 coats?
Jim Schaffer -- 8/21/2012, 8:37 pm
Re: Why 6 coats?
Marc Upchurch -- 8/21/2012, 10:50 pm
Re: Why 6 coats?
Bill Hamm -- 8/22/2012, 12:53 am
Re: Why 6 coats?
Bill Hamm -- 8/22/2012, 12:55 am
Re: Why 6 coats?
Etienne Muller -- 8/22/2012, 4:01 am
Re: Why 6 coats?
Marc Upchurch -- 8/22/2012, 8:25 pm
Re: Why 6 coats?
Etienne Muller -- 8/23/2012, 3:54 am
Re: Why 6 coats?
Rod Tait (Orca Boats) -- 8/22/2012, 8:51 pm
Re: Why 6 coats?
John Abercrombie -- 8/22/2012, 8:56 pm
Re: Why 6 coats?
Rod Tait (Orca Boats) -- 8/22/2012, 9:15 pm
Re: Why 6 coats?
Bill Hamm -- 8/23/2012, 6:14 am
Re: Why 6 coats?
Etienne Muller -- 8/23/2012, 11:41 am
Re: Why 6 coats?
John Abercrombie -- 8/22/2012, 2:39 am
Re: Why 6 coats?
Jim Schaffer -- 8/22/2012, 3:11 pm
Re: Why 6 coats?
ancient kayaker -- 8/22/2012, 1:47 pm
Re: Why 6 coats?
Robert l -- 8/22/2012, 1:59 pm