Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: More questions....Who knew!
By:stefalo
Date: 8/31/2012, 12:55 pm

: I went with the Yost-style, double-ringed coaming and it worked out
: fine. I stapled the skin to the topside of the bottom ring -
: instead of wrapping the skin under the ring and stapling
: underneath. Then I ran a bead of Marine Goop on top of that and
: then screwed the top ring to the bottom. I put the screws up
: through the bottom and into the top. This way they are hidden
: from view.

:
: http://justyakkin2.blogspot.ca/2011/08/things-are-coaming-along.html

: Make sure you use stainless steel staples - especially if you are
: leaving them exposed to the water. I probably could've use
: regular ones as my staples and completely sealed from the water
: by being sandwiched between the rings in a bed of Goop

: I'm 6'3" and 195 lb so I guess I'm not a lightweight paddler
: either.

: Sean

Thanks again everyone. I think I will go yost style just for peace of mind. I do have a bad habit of entering with my hands on the coaming as opposed to the gunwhale tops.

Stefan
: .

Messages In This Thread

Skin-on-Frame: More questions....Who knew!
stefalo -- 8/30/2012, 5:17 pm
Re: Skin-on-Frame: More questions....Who knew!
Chuck Smith -- 8/30/2012, 10:34 pm
Re: Skin-on-Frame: More questions....Who knew!
ancient kayaker -- 8/30/2012, 11:56 pm
Re: Skin-on-Frame: More questions....Who knew!
stefalo -- 8/31/2012, 1:19 am
Re: Skin-on-Frame: More questions....Who knew!
ancient kayaker -- 8/31/2012, 10:03 am
Re: Skin-on-Frame: More questions....Who knew! *PIC*
Sean Dawe -- 8/31/2012, 7:53 am
Re: Skin-on-Frame: More questions....Who knew!
stefalo -- 8/31/2012, 12:55 pm
Re: Skin-on-Frame: More questions....Who knew!
Martin B -- 9/1/2012, 10:42 pm
Re: Skin-on-Frame: More questions....Who knew!
Sean Dawe -- 9/2/2012, 10:22 am