One thing to consider is the colour change that can occur in the wood with some glues and woods. For instance the glue joints between redwood strips using Titebond II will turn Dark Maroon almost black. This can bee seen in the picture below. The lack of dark lines is where I did not put enough glue that it squared out... Time will tell if it cracks and turns white from bad glue joints...

: I've been using Titebond II for the hull stripping so far and am
: happy with it. I've read that this type of glue may soften from
: heat
: (sun exposure) so it may not be best for stripping the deck. What
: have other folks used?

: I could use Gorilla glue (urethane based) but I don't like it that
: much as it expands a lot during curing.
: That plus, it's best to moisten the wood before applying it ...
: another blooming step.

: Any recommendations one way or the other?
: Thx,
: Rob