Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
By:Robert N Pruden
Date: 9/29/2012, 3:05 pm
In Response To: S&G: I have a flat bottomed 12' S&G and... (Robert N Pruden)

Ok, the RP Sport is now glued, screwed and not quite trued. I managed to break off the ends of my new panels so opted to use duct tape and wood flour thickened epoxy to make the ends of the kayak work. I made a dam using the duct tape and filled them both with the thick stuff. Tomorrow I will remove the tapes (if I can) and sand the keels to shape. I hate having to do it this way but I have done it before and it works really well, it's just a pain to have to do it this way. That said, the epoxy ends will be a great support for the brass strips that will line the keels. I also glued all joints associated with the new panels, so tomorrow I will also remove the wires and start sanding to shape...that is, unless the wife finds something else for me to do. To prevent her from thinking this way...I am doing the laundry today, in advance of any distracting suggestions she might think of ... and I have, of course, already washed the dishes and vacuumed the rugs. To make certain that I get my way, I even whipped up a nice eggs, bacon, grapes and toast breakfast for her. Am I sucking up to her for my own selfish reasons? Absolutely!

Robert N Pruden

Messages In This Thread

S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/5/2012, 10:44 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/5/2012, 11:14 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/6/2012, 1:52 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 8:49 am
Re: S&G: I have a flat bottomed 12' S&G and...
John Abercrombie -- 9/6/2012, 11:27 am
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/6/2012, 11:56 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 12:31 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Malcolm Schweizer -- 9/6/2012, 12:57 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/6/2012, 5:12 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/9/2012, 1:48 am
Re: S&G: I have a flat bottomed 12' S&G and...
mick allen -- 9/6/2012, 6:24 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Etienne Muller -- 9/7/2012, 3:33 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/8/2012, 12:31 am
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/8/2012, 11:57 am
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/7/2012, 6:22 pm
Re: S&G: I have a flat bottomed 12' S&G and...
John Abercrombie -- 9/7/2012, 8:46 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/7/2012, 9:25 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/7/2012, 9:26 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 9/7/2012, 11:01 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/10/2012, 9:44 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Kenneth Sutherland -- 9/11/2012, 12:03 am
Re: S&G: I have a flat bottomed 12' S&G and...
Bill Hamm -- 9/11/2012, 1:57 am
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/11/2012, 9:03 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Kenneth Sutherland -- 9/14/2012, 11:25 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 9/11/2012, 2:08 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/11/2012, 8:03 pm
Progress on the RP Sport surprises me *PIC*
Robert N Pruden -- 9/12/2012, 1:56 pm
Oh yeah...one more thought...
Robert N Pruden -- 9/12/2012, 2:00 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/12/2012, 3:34 pm
How do I know I am nutsy about building?
Robert N Pruden -- 9/13/2012, 5:37 pm
Joggle Stick for panel shape transfer *PIC*
Kenneth Sutherland -- 9/14/2012, 12:31 am
Re: Joggle Stick for panel shape transfer
Robert N Pruden -- 9/14/2012, 4:34 pm
Re: Joggle Stick for panel shape transfer
Robert N Pruden -- 9/18/2012, 5:26 pm
Re: Joggle Stick for panel shape transfer
John Messinger -- 9/25/2012, 8:23 am
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/21/2012, 11:35 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/23/2012, 1:13 am
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/25/2012, 2:29 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/27/2012, 2:05 am
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/26/2012, 5:49 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/27/2012, 6:53 pm
Re: How do I know I am nutsy about building?
ancient kayaker -- 9/27/2012, 11:05 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 9/27/2012, 11:13 pm
Re: How do I know I am nutsy about building?
Bryan K -- 10/17/2012, 4:28 pm
Re: How do I know I am nutsy about building?
Robert N Pruden -- 10/17/2012, 6:34 pm
Re: How do I know I am nutsy about building?
Paul Davies -- 10/17/2012, 7:41 pm
Andy Rooney Responds
John Messinger -- 10/17/2012, 8:16 pm
Re: Andy Rooney Responds
Etienne Muller -- 10/18/2012, 4:29 am
Re: Andy Rooney Responds
Robert N Pruden -- 10/26/2012, 5:09 pm
Re: Andy Rooney Responds
Bill Hamm -- 10/28/2012, 2:10 am
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/28/2012, 12:47 pm
Re: How do I know I am nutsy about building?
Bill Hamm -- 9/28/2012, 12:46 pm
Some progress on the now not flat bottomed kayak *PIC*
Robert N Pruden -- 9/20/2012, 5:57 pm
Re: Some progress on the now not flat bottomed kay
Paul Davies -- 9/20/2012, 7:54 pm
Getting the ribs made and installed.. *PIC*
Robert N Pruden -- 9/21/2012, 11:33 am
Re: Getting the ribs made and installed.. *PIC*
woodman -- 9/21/2012, 1:30 pm
Re: Getting the ribs made and installed.. *PIC*
woodman -- 9/21/2012, 1:32 pm
Re: Getting the ribs made and installed..
Robert N Pruden -- 9/21/2012, 1:50 pm
Re: Getting the ribs made and installed..
Robert N Pruden -- 9/25/2012, 12:24 pm
Re: Some progress on the now not flat bottomed kay *PIC*
Robert N Pruden -- 9/21/2012, 3:28 pm
Re: Some progress on the now not flat bottomed kay *PIC*
Robert N Pruden -- 9/21/2012, 5:49 pm
Tracing a new panel completed... *PIC*
Robert N Pruden -- 9/24/2012, 10:56 am
New panel is glued together in situ *PIC*
Robert N Pruden -- 9/24/2012, 6:24 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/24/2012, 12:12 pm
Alrighty...new panel is shaped and installed... *PIC*
Robert N Pruden -- 9/24/2012, 5:00 pm
Re: Alrighty...new panel is shaped and installed..
scottbaxter -- 9/24/2012, 8:22 pm
Re: Alrighty...new panel is shaped and installed..
Robert N Pruden -- 9/25/2012, 12:18 pm
Re: Alrighty...new panel is shaped and installed..
Bill Hamm -- 9/27/2012, 1:59 am
Re: Alrighty...new panel is shaped and installed..
Paul Davies -- 9/24/2012, 8:37 pm
Re: Alrighty...new panel is shaped and installed..
Robert N Pruden -- 9/25/2012, 12:21 pm
Re: Alrighty...new panel is shaped and installed..
ancient kayaker -- 9/26/2012, 5:53 pm
Re: Alrighty...new panel is shaped and installed.. *PIC*
Sean Dawe -- 9/25/2012, 1:10 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 9/29/2012, 3:05 pm
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 10/6/2012, 12:43 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/6/2012, 1:35 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 10/7/2012, 1:30 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/9/2012, 2:52 pm
Re: S&G: I have a flat bottomed 12' S&G and...
ancient kayaker -- 10/9/2012, 4:47 pm
Re: S&G: I have a flat bottomed 12' S&G and...
Robert N Pruden -- 10/10/2012, 9:41 am
So I get home Friday evening after...
Robert N Pruden -- 10/15/2012, 12:11 am
Re: S&G: I have a flat bottomed 12' S&G and... *PIC*
Robert N Pruden -- 10/28/2012, 4:38 pm
Snowing and cold outside but...
Robert N Pruden -- 10/28/2012, 5:25 pm
Grin And Bear Me....
Robert N Pruden -- 10/28/2012, 7:38 pm
Re: Grin And Bear Me....
Malcolm Schweizer -- 10/30/2012, 8:26 am
Re: Grin And Bear Me....
Robert N Pruden -- 10/30/2012, 7:11 pm
Re: Grin And Bear Me....
Robert N Pruden -- 10/30/2012, 7:29 pm
Brass rub strip is installed *PIC*
Robert N Pruden -- 10/30/2012, 11:08 pm
Riser and hatch supports installed tonight... *PIC*
Robert N Pruden -- 11/2/2012, 10:34 pm
Lots of stuff done today... *PIC*
Robert N Pruden -- 11/3/2012, 5:04 pm
Brass rub strip installed. *PIC*
Robert N Pruden -- 11/3/2012, 5:05 pm
Re: Brass rub strip installed. *PIC*
Robert N Pruden -- 11/3/2012, 5:07 pm
Seat hinges last thing to do today before launch *PIC*
Robert N Pruden -- 11/3/2012, 5:10 pm
Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:36 pm
Re: Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:38 pm
Re: Maiden launch completed *PIC*
Robert N Pruden -- 11/4/2012, 5:39 pm
Re: Maiden launch completed
Bill Hamm -- 11/5/2012, 12:15 am
Re: Maiden launch completed
Robert N Pruden -- 11/5/2012, 2:09 pm
'Bama won and it's a snow day here...
Robert N Pruden -- 11/7/2012, 10:33 am
Re: 'Bama won and it's a snow day here...
Kenneth Sutherland -- 11/7/2012, 11:07 pm
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 4:58 pm
Re: 'Bama won and it's a snow day here...
Etienne Muller -- 11/8/2012, 3:46 am
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 4:59 pm
Re: 'Bama won and it's a snow day here...
John Messinger -- 11/8/2012, 7:34 am
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 5:00 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 12:08 pm
Re: 'Bama won and it's a snow day here... *PIC*
Sean Dawe -- 11/8/2012, 2:41 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 4:31 pm
Re: 'Bama won and it's a snow day here...
Robert N Pruden -- 11/8/2012, 5:02 pm
Re: 'Bama won and it's a snow day here...
Paul Davies -- 11/8/2012, 7:57 pm