Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

also
By:mick allen
Date: 11/12/2012, 1:00 am
In Response To: Re: Skin-on-Frame: threading deck lines (Bungee) (mick allen)

: I'm not sure what a slider is, but threading bungee thru tight
: holes is made easy by folding the sheath back by a few inches,
: trimming back the rubber core, pulling the sheath forward
: tightly so it necks right down, saturating with CA, and slicing
: the very end at a sharp angle with a razor knife.
: Now you can thread in very tight holes. If your slider happens to
: have slots instead of holes, or has curved holes - you can
: preshape the sheath before saturating.

Also when you cut the core, do it at an angle - so diameter change is less abrupt. (I'd choose thick CA for the glue & accelerator for quick setup)

Messages In This Thread

Skin-on-Frame: threading deck lines (Bungee)
Don betz -- 11/11/2012, 5:18 pm
Re: Skin-on-Frame: threading deck lines (Bungee)
Ken Blanton -- 11/11/2012, 7:58 pm
Re: Skin-on-Frame: threading deck lines (Bungee)
charles Robinson -- 11/11/2012, 8:40 pm
Re: Skin-on-Frame: threading deck lines (Bungee)
mick allen -- 11/11/2012, 9:21 pm
also
mick allen -- 11/12/2012, 1:00 am
another technique
mick allen -- 11/12/2012, 2:27 pm
Re: Skin-on-Frame: threading deck lines (Bungee)
Etienne Muller -- 11/12/2012, 4:38 am
Don't waste your time with bungee cord
Brian Nystrom -- 11/12/2012, 6:35 am
Re: Don't waste your time with bungee cord
Jeff Horton -- 11/12/2012, 9:13 am
Re: Don't waste your time with bungee cord
Brian Nystrom -- 11/12/2012, 12:15 pm
Re: Don't waste your time with bungee cord
Etienne Muller -- 11/12/2012, 1:28 pm
Re: Don't waste your time with bungee cord
Brian Nystrom -- 11/13/2012, 7:13 am
Re: Don't waste your time with bungee cord
Scott Fitzgerrell -- 11/13/2012, 12:23 pm
Re: Don't waste your time with bungee cord
Brian Nystrom -- 11/13/2012, 1:10 pm
Re: Don't waste your time with bungee cord
Etienne Muller -- 11/13/2012, 5:45 pm
Re: Don't waste your time with bungee cord
Bill Hamm -- 11/14/2012, 1:09 am
Re: Don't waste your time with bungee cord
Mike Bielski -- 11/13/2012, 9:16 pm
Re: Don't waste your time with bungee cord
Don Betz -- 11/14/2012, 10:08 am
Re: Don't waste your time with bungee cord
Jeff Horton -- 11/12/2012, 6:24 pm