Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: alu-tube rigidity
By:Brian Nystrom
Date: 11/16/2012, 12:31 pm
In Response To: Re: Material: alu-tube rigidity (Bill Hamm)

: True, but soft aluminum you find often locally will bend easily.
: Has to be hardened and much stuff in the building stores isn't.

That's where the yield strength of the material comes into play. Higher yield strength means it can be flexed farther before it bends or breaks. The downside to high strength alloys and hardened materials is that they are typically more brittle, so they may break rather than bend. A balance needs to be stuck, based on the application.

: Also Tom's boats don't have all the strength in the keel, it's a
: combination of all the chines, stringers, keel and gunwales that
: make it strong. The wood ones have no strength at all using just
: the keel (I doubt you could pick it up with just the keel and
: the frames), but are quite strong when all the long members are
: added.

In other words, a boat is the sum of its parts and its strength is not defined by any one of them. It's also important to remember that the skin is a structural component and contributes to the overall strength and rigidity of a boat, not to mention its ability to float. ;-)

Messages In This Thread

Material: alu-tube rigidity
CarstenT -- 11/14/2012, 3:26 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/14/2012, 6:55 pm
Re: Material: alu-tube rigidity
ancient kayaker -- 11/15/2012, 12:06 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/15/2012, 2:03 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/15/2012, 7:18 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:22 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/16/2012, 12:31 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:32 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:22 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:39 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:35 am
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/18/2012, 9:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:16 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/17/2012, 3:54 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 7:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:38 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/18/2012, 12:42 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 11:06 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:22 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 1:42 pm
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/15/2012, 2:02 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 3:04 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:26 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/15/2012, 11:11 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:51 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:32 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:42 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:29 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/16/2012, 11:21 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:44 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:45 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 1:56 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:19 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 6:53 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:29 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 5:30 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/17/2012, 10:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:47 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 4:07 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 4:34 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 5:40 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:50 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:10 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:22 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:51 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:25 am
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/19/2012, 10:14 am
Re: Material: alu-tube rigidity
CarstenT -- 11/18/2012, 4:31 am
Electrolysis
CarstenT -- 6/2/2013, 6:39 am
Re: Electrolysis
Jeff Buyer -- 6/2/2013, 7:39 am
Re: Electrolysis
CarstenT -- 6/2/2013, 9:46 am
Re: Electrolysis
Tom Cooper -- 6/2/2013, 10:35 am
Re: Electrolysis
CarstenT -- 6/2/2013, 12:57 pm
Clogged up hinges. Solution
CarstenT -- 6/26/2013, 4:43 am
Re: Material: alu-tube rigidity
JohnAbercrombie -- 11/18/2012, 3:03 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:33 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/19/2012, 9:48 am
Re: Material: alu-tube rigidity
CarstenT -- 10/17/2014, 5:31 am
Re: Material: alu-tube rigidity
Bill Hamm -- 10/17/2014, 9:56 am
Re: Material: alu-tube rigidity
CarstenT -- 10/18/2014, 6:00 am