Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: alu-tube rigidity
By:Bill Hamm
Date: 11/17/2012, 1:44 pm
In Response To: Re: Material: alu-tube rigidity (Jeff Buyer)

: Bill,

: Pultruded tubes from CSTSales run 197 grams/8 foot for 0.5"
: diameter, 111 grams/8 feet for 0.375" diameter. Dragonplate
: sells similar tubes (probably from the same manufacturer).
: I don't know if you consider this resin-rich or not, but its a huge
: weight savings over wood or aluminum.

: I will definitely post results, good or bad, from this project.
: I've got the frame pulled together with electrical ties right
: now but have not started on the stems. And I'm busy right now
: making a sectional three-piece SeaBee for my daughter for Xmas,
: so I won't get back to the carbon fiber project until January at
: the earliest.

: Jeff
: .

I've off and on (recently alot of off) played around with ways of making my own tube to keep the resin to glass ratio to a reasonable level. It's fairly tricky to make a long skinny part.

Bill H.

Messages In This Thread

Material: alu-tube rigidity
CarstenT -- 11/14/2012, 3:26 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/14/2012, 6:55 pm
Re: Material: alu-tube rigidity
ancient kayaker -- 11/15/2012, 12:06 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/15/2012, 2:03 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/15/2012, 7:18 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:22 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/16/2012, 12:31 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:32 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:22 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:39 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:35 am
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/18/2012, 9:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:16 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/17/2012, 3:54 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 7:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:38 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/18/2012, 12:42 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 11:06 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:22 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 1:42 pm
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/15/2012, 2:02 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 3:04 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:26 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/15/2012, 11:11 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:51 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:32 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:42 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:29 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/16/2012, 11:21 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:44 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:45 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 1:56 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:19 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 6:53 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:29 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 5:30 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/17/2012, 10:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:47 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 4:07 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 4:34 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 5:40 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:50 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:10 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:22 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:51 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:25 am
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/19/2012, 10:14 am
Re: Material: alu-tube rigidity
CarstenT -- 11/18/2012, 4:31 am
Electrolysis
CarstenT -- 6/2/2013, 6:39 am
Re: Electrolysis
Jeff Buyer -- 6/2/2013, 7:39 am
Re: Electrolysis
CarstenT -- 6/2/2013, 9:46 am
Re: Electrolysis
Tom Cooper -- 6/2/2013, 10:35 am
Re: Electrolysis
CarstenT -- 6/2/2013, 12:57 pm
Clogged up hinges. Solution
CarstenT -- 6/26/2013, 4:43 am
Re: Material: alu-tube rigidity
JohnAbercrombie -- 11/18/2012, 3:03 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:33 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/19/2012, 9:48 am
Re: Material: alu-tube rigidity
CarstenT -- 10/17/2014, 5:31 am
Re: Material: alu-tube rigidity
Bill Hamm -- 10/17/2014, 9:56 am
Re: Material: alu-tube rigidity
CarstenT -- 10/18/2014, 6:00 am