Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: alu-tube rigidity
By:CarstenT
Date: 11/17/2012, 4:34 pm
In Response To: Re: Material: alu-tube rigidity (Jeff Buyer)

: I planned my build based on beam deflection calculations. A
: 0.5" diameter carbon tube with a 1' span between frames
: deflects a little less than a 0.75" aluminum tube with a 2'
: span between frames at identical loading. So I went with 1'
: frame spacing. Of course, that is not a complete model of stress
: on a kayak in use. Also, while the pultruded tubes are extremely
: stiff in compression and extension, and therefore have good
: resistance to bending, they are prone to catastrophic failure in
: torsion (i.e. twisting of the tube). I will probably use Kevlar
: fiber a la Platt Monfort, wrapped around each intersection of
: tube and frame, to further avoid torsion.

I gather that the tubes are fixed to the frame then.
How? I'm sort of lost when you talk about torsion. Where does it originate?

So far my carbon-tubes lie loose in an short alumina tube that is then fixed to the frame.
I've considered to soften the edges of the small alu-tube to avoid sharp corners that would be a perfect place to crack the carbon.
The principle matches a through-going wire that holds it all together - a decision that may come to spank me later.

: The additional frames
: and the Kevlar may not be necessary, but given the lack of
: experience with the carbon fiber tubes these seem like
: reasonable precautions. And we won't try out this kayak until
: the water warms up in the spring!

Jeff, have you got any pics?

Messages In This Thread

Material: alu-tube rigidity
CarstenT -- 11/14/2012, 3:26 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/14/2012, 6:55 pm
Re: Material: alu-tube rigidity
ancient kayaker -- 11/15/2012, 12:06 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/15/2012, 2:03 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/15/2012, 7:18 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:22 am
Re: Material: alu-tube rigidity
Brian Nystrom -- 11/16/2012, 12:31 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:32 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:22 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:39 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:35 am
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/18/2012, 9:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:16 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/17/2012, 3:54 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/17/2012, 7:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 12:38 am
Re: Material: alu-tube rigidity
Mike Savage -- 11/18/2012, 12:42 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 11:06 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:22 pm
Re: Material: alu-tube rigidity
Yostwerks -- 11/15/2012, 1:42 pm
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/15/2012, 2:02 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 3:04 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:26 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/15/2012, 11:11 am
Re: Material: alu-tube rigidity
CarstenT -- 11/15/2012, 12:51 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:32 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 5:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:42 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/16/2012, 10:29 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/16/2012, 11:21 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:44 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 3:53 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:45 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 1:56 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:19 am
Re: Material: alu-tube rigidity
CarstenT -- 11/16/2012, 6:53 pm
Re: Material: alu-tube rigidity
Marc Upchurch -- 11/16/2012, 9:29 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 5:30 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/17/2012, 10:40 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/17/2012, 1:47 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 4:07 pm
Re: Material: alu-tube rigidity
CarstenT -- 11/17/2012, 4:34 pm
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/17/2012, 5:40 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:50 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:10 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:22 am
Re: Material: alu-tube rigidity
Bill Hamm -- 11/18/2012, 1:51 am
Re: Material: alu-tube rigidity
Jeff Buyer -- 11/18/2012, 2:07 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:25 am
Re: Material: alu-tube rigidity *PIC*
Yostwerks -- 11/19/2012, 10:14 am
Re: Material: alu-tube rigidity
CarstenT -- 11/18/2012, 4:31 am
Electrolysis
CarstenT -- 6/2/2013, 6:39 am
Re: Electrolysis
Jeff Buyer -- 6/2/2013, 7:39 am
Re: Electrolysis
CarstenT -- 6/2/2013, 9:46 am
Re: Electrolysis
Tom Cooper -- 6/2/2013, 10:35 am
Re: Electrolysis
CarstenT -- 6/2/2013, 12:57 pm
Clogged up hinges. Solution
CarstenT -- 6/26/2013, 4:43 am
Re: Material: alu-tube rigidity
JohnAbercrombie -- 11/18/2012, 3:03 pm
Re: Material: alu-tube rigidity
Bill Hamm -- 11/19/2012, 1:33 am
Re: Material: alu-tube rigidity
Yostwerks -- 11/19/2012, 9:48 am
Re: Material: alu-tube rigidity
CarstenT -- 10/17/2014, 5:31 am
Re: Material: alu-tube rigidity
Bill Hamm -- 10/17/2014, 9:56 am
Re: Material: alu-tube rigidity
CarstenT -- 10/18/2014, 6:00 am