Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fiberglassing my kayak
By:JohnAbercrombie
Date: 11/28/2012, 3:25 pm
In Response To: Epoxy: Fiberglassing my kayak (Jack Hawkins)

: Hi:
: I am in the process of building a Night Heron in my basement
: workshop. My first thought was to take the finished hull &
: deck to my buddies shop 40 miles away. Big project and a lot of
: shop modification the get the boat in. I'm wondering if any of
: you fiberglassed your kayak in you basement, and if you are
: married, did you survive your wife's wrath?? My concern is fumes
: etc. I can close up the shop and there is a window which I can
: vent out.
: Thanks,

: Jack
I use WEST epoxy, which is quite 'low odour'; I've used some other brands which were a bit more 'smelly'. However, none of the epoxies I've used were anything like polyester resin in terms of odour. Polyester is what most folks think of when you talk about fiberglass work - it's in Bondo , etc.

Polyester resin smell will penetrate through most homes.

Unless your wife is overly sensitive to organic vapours, and your house is very tightly sealed, I don't think epoxy work should be a big problem. I work in the attached garage (under our office/guest room) and haven't gotten any comments about epoxy smells.

If you are planning to use sizable quantities of alcohol or acetone for cleaning tools, etc. it would be best to do that out-of-doors, I think.

Messages In This Thread

Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 3:13 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 11/28/2012, 3:25 pm
Re: Epoxy: Fiberglassing my kayak
Jeff Horton -- 11/28/2012, 3:43 pm
Re: Epoxy: Fiberglassing my kayak
Mark Rakestraw -- 11/28/2012, 3:46 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:57 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/2/2012, 11:35 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/3/2012, 12:27 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/3/2012, 8:49 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 12/3/2012, 10:21 pm
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:15 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/3/2012, 11:08 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:35 am
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/4/2012, 3:18 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:13 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:34 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:11 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:10 am
Re: Epoxy: Fiberglassing my kayak
Malcolm Schweizer -- 11/28/2012, 7:32 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 7:41 pm
Most excellent advice, Malcolm
Robert N Pruden -- 11/30/2012, 12:21 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 11/28/2012, 8:39 pm
Re: Epoxy: Fiberglassing my kayak
Chris -- 11/28/2012, 9:00 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:55 am
Re: Epoxy: Fiberglassing my kayak
Robert N Pruden -- 11/29/2012, 8:58 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 12/1/2012, 12:48 pm