Be very careful with a forced air pump, I don't know about a Hydroponic pump, but if it is possible to get any oil from a pump it will just coat your lungs. My scuba courses said it was a good way to hurt yourself badly. The oil does not come out of your lungs easily, or at all.
: I might have avoided smell in the house from the epoxy but I
: finished the kayak with two part polyurethane which is a more
: serious issue. With the fans I didn't smell a hint of it
: elsewhere in the house, and it is powerfully smelly stuff. I
: have on other occasions used solvents in the same part of the
: basement, and received complaints from the other half about
: smell elsewhere, so I know that in our house the two part
: polyurethane application to a kayak would have been a serious
: problem without the fans.
: more or less on the topic of applying smelly stuff in the house,
: for breathing during application of the polyurethane, I hooked
: up a respirator to a plastic pipe normally used for sump pumps,
: and put the intake end outside the house through a second
: window. A normal organic vapor cartridge hardly touches the odor
: from the that stuff. The plastic pipe was a bit of a pain to
: drag around during the work, but it did the job if somewhat
: inconveniently. If I do another kayak with this finish, I will
: rig up a pressurized air supply, likely using a hydroponic air
: pump. That way, a small diameter air tube can be used which
: would be more easily moved about. OTOH, one could just buy a
: supplied air respirator system, but they are expensive.
: AE
Messages In This Thread
- Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 3:13 pm- Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 11/28/2012, 3:25 pm- Re: Epoxy: Fiberglassing my kayak
Jeff Horton -- 11/28/2012, 3:43 pm- Re: Epoxy: Fiberglassing my kayak
Mark Rakestraw -- 11/28/2012, 3:46 pm- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:57 am- Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/2/2012, 11:35 am- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/3/2012, 12:27 am- Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/3/2012, 8:49 pm- Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 12/3/2012, 10:21 pm- Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:15 pm
- Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/3/2012, 11:08 pm- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:35 am- Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/4/2012, 3:18 am- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:13 am
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:34 am- Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:11 pm- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:10 am
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak
Malcolm Schweizer -- 11/28/2012, 7:32 pm- Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 7:41 pm- Most excellent advice, Malcolm
Robert N Pruden -- 11/30/2012, 12:21 pm - Most excellent advice, Malcolm
- Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 11/28/2012, 8:39 pm- Re: Epoxy: Fiberglassing my kayak
Chris -- 11/28/2012, 9:00 pm- Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:55 am- Re: Epoxy: Fiberglassing my kayak
Robert N Pruden -- 11/29/2012, 8:58 pm- Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 12/1/2012, 12:48 pm
- Re: Epoxy: Fiberglassing my kayak
- Re: Epoxy: Fiberglassing my kayak